139904
40
Zoom out
Zoom in
Previous page
1/140
Next page
11 Enjoying through External Equipment
40
En
Item Description
Auto Automatically identifies input audio
(factory default) signals.
Digital Accepts digital audio signals.
Analogue Accepts analogue audio signals.
4
Press HOME MENU to exit the menu.
If no sound is output, specify another audio signal type.
For the audio signal types to be specified, check the
operation manual that came with the connected equip-
ment.
Depending on the equipment to be connected, you also
need to connect analogue audio cables.
Using HDMI Input
The INPUT 3 terminals include HDMI terminals to which
digital video and audio signals can be input. To use the HDMI
terminal, activate the terminal and specify the types of video
and audio signals to be received from the connected equip-
ment. For the types of these signals, see the operation
manual that came with the connected equipment.
Before starting the menu, press INPUT 3 on the remote
control unit or press INPUT on the Plasma Display to select
INPUT 3.
Input signal correlation table
1920
1080i@50Hz
720
576p@50Hz
128 0
720p@50Hz
720(1440)
576i@50Hz
1920
1080i@59.94/60Hz
720
480p@59.94/60Hz
128 0
720p@59.94/60Hz
720(1440)
480i@59.94/60Hz
Connecting HDMI equipment
To specify the type of digital video signals:
1
Repeat steps 1 to 3 provided To activate the HDMI
terminal.
2
Select “Video” ( / then ENTER).
3
Select the type of digital video signals ( / then
ENTER).
If you select “Auto”, an attempt will be made to
identify the type of digital video signals when digital
video signals are received.
Item Description
Auto Automatically identifies input digital video
(factory default) signals.
Colour-1 Digital Component Video signals (4:2:2)
locked
Colour-2 Digital Component Video signals (4:4:4)
locked
Colour-3 Digital RGB signals locked
4
Press HOME MENU to exit the menu.
If you select a parameter other than Auto, make such a
setting that results in natural colour.
If no image appears, specify another digital video signal
type.
For the digital video signal types to be specified, check the
operation manual that came with the connected equip-
ment.
To specify the type of audio signals:
1
Repeat steps 1 to 3 provided To activate the HDMI
terminal.
2
Select “Audio” ( / then ENTER).
3
Select the type of audio signals ( / then ENTER).
If you select “Auto”, an attempt will be made to
identify the type of audio signals when audio signals
are received.
Media Receiver (rear view)
To activate the HDMI terminal:
1
Press HOME MENU.
2
Select “Option” ( / then ENTER).
3
Select “HDMI Input” ( / then ENTER).
4
Select “Setting” ( / then ENTER).
5
Select “Enable” ( / then ENTER).
Item Description
Disable Deactivates the HDMI terminal.
(factory default)
Enable Activates the HDMI terminal.
6
Press HOME MENU to exit the menu.
SERVICE ONLY
i / o link.A
SELECT
INPUT
23
INPUT 2
INPUT 1
INPUT 3
INP UT 2
YP
B
P
R
COMPONENT VIDEO
MONITOR
OUTPUT
R-AUDIO-L
S-VIDEO
VIDEO
HDMI
INPUT 3
HDMI cable
(commercially
available.)
SCART cable
(commercially available.)
Connect the SCART cable only
when inputting analogue audio
signals.
HDMI equipment
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer 435 fde at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer 435 fde in the language / languages: English, German, French as an attachment in your email.

The manual is 7,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer 435 fde

Pioneer 435 fde User Manual - Dutch, Italian, Spanish - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info