725645

Pinion P-line Manual

13
Zoom out
Zoom in
Previous page
1/36
Next page
INSTALLATION WORK
13
INSTALLING OR REPLACING PULLING CABLES
You operate your Pinion bicycle transmission with 2 pulling cables.
The clamps for the pulling cable ends are in the rotary shifter.
It is essential that you use commercially available derailleur inner cables with
dimension Ø1.2 mm, nipple 4.4 × 4.4 mm.
Genuine Pinion derailleur cables guarantee optimum shifting behaviour and
can be ordered directly from Pinion or from any Pinion bicycle dealer.
During installation of the pulling cables, you will need to move the sun gear of
your Pinion bicycle transmission, so it is a good idea if the right crank and
chain ring are fitted. This makes it much easier for you to brace the transmis-
sion shaft.
)
Unscrew the housing screws
(
1
)
of the cover
(
2
)
on the rotary shifter.
)
Remove the cover.
8 mm
0,25 N·m (2 lbf·in) max.
7
1
2
0,4 N·m (4 lbf·in) max.
1,5 mm
8
3
The clamp screws are easily accessible at rotary shifter positions 01and18 or
01and12 or 01and09 depending on the type of your pinion bicycle transmis-
sion.
)
Slacken clamp screws
(
3
)
– 2× per pulling cable end.
)
Pull the pulling cables out of the rotary shifter.
)
Cut off the spliced-on pulling cable ends with a sharp wire cutter.
)
Hold adjusting screws
(
4
)
and slacken lock nuts
(
5
)
(
fig. 7
)
.
)
Screw the lock nuts to the stop on the heads of the adjusting screws.
)
First, screw in adjusting screws completely – then unscrew three revolutions.
ÎÎ
This ensures an adequate adjustment range for subsequent adjustments of
the transmission.
5
4
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pinion P-line at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pinion P-line in the language / languages: English as an attachment in your email.

The manual is 14,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pinion P-line

Pinion P-line User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info