Manual Pinell Supersound 101 (page 5 of 11) (English)

748304

Zoom out

Zoom in

1/11

Note that if you are updating the time from DAB or FM, the Daylight savings

option has no effect on the clock’s time.

IR1 will auto-update from the selected Mode when time information is available.

3.1.3 Network

IR1 is compatible with all common network protocols and encryption methods,

including Wi-Fi Protected Setup (WPS).

To connect IR1 to your network, you need a Wi-Fi wireless router, together

with password key if set Select WLAN region/country >Wi-Fi network (SSID),

and then select a network from the list.

• Push Button >

IR1 prompts you to press the connect button on the router. It then presses

the select control.

• Pin > (code number)

IR1 generates an 8-digit code number which you enter into the wireless

router, access point.

• Skip WPS >

Enter key as for a standard encrypted network, above. For more information

on setting up a WPS encrypted network, see your WPS router’s instructions.

On completion

IR1 connects to the selected network.

If connecting fails, IR1 returns to a previous screen to try again. To exit the

process use the Back/Menu button

If the network is open (non-encrypted), IR1 connects and no further details

are required; see Completion below.

Standard encrypted network

To enter the network’s key (password), use the Select control to highlight the

next relevant character and press to select each character in turn. As each

character is selected, the key is built up near the top of the display.

The three options – Backspace, OK and Cancel are included in the election loop.

These can be accessed just using the Select control, or, a short cut is

available, pressing the Info key, which moves the selection highlight to the

Back Space option.

WPS setup

WPS encrypted networks are identified by ‘[WPS]’ at the start of the Network

name, and have two methods of connection. Select one and follow the

prompts. When using the network wizard an additional option to Skip

WPS is available.

9 10

3.2 Other settings

3.2.2 Network

IR1 remembers the last four wireless networks it has connected to, and

automatically tries to connect to whichever one of them it can find. You

can see the list of registered networks through

Menu > System settings >Network > Network profile >From here you

can delete unwanted networks by turning and pressing Select then

confirming delete Yes.

There are also other options for viewing and manually altering network

settings from Menu > System settings > Network >

(for example setting up a wired network).

Users experienced with networking may find these options useful for

diagnosing and fixing network problems.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pinell Supersound 101 in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pinell Supersound 101

Pinell Supersound 101 User Manual - Dutch - 11 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pinell Supersound 101 Manual

Product: