643482
22
Zoom out
Zoom in
Previous page
1/52
Next page
- Replace the removed pipe [D] with the side ue gas outlet connection
[E] to be found in the kit, inserting it fully into its seat and taking
care to seal it with a gasket and a silicone-based (not cement-based)
sealant. (Fig. 37)
- Secure the ue gas outlet connection [E] with the previously removed
screw [C].
- Ret the smoke sensor, ensuring that it is fully inserted and securing it
with the screw [B], which must not be overtightened. (Fig. 38)
- Ret the rear panel [A].
- Take the previously removed left side panel and use a screwdriver to
remove the knockout [F] to be found in the lower part, taking care not
to scratch or buckle the panel.
Apply the edge gasket [G] provided in the kit around the edge of the
hole made in the panel. Cut off any excess gasket. (Fig. 39)
a It is advisable to secure the gasket with a few drops of high
heatresistant silicone.
- Ret the left side panel, proceeding with the steps described for
removal in the reverse order.
- Connect to the ueway in accordance with the instructions given in
the section “GENERAL RULES”.
a When installing with side ue gas outlet, the MINIMUM
distance of the ue gas outlet pipe from the stove is given in
the paragraph “DIMENSIONS”.
This measurement is obtained by inserting a pipe with diameter
2.95” (75 mm) and length 8.62” (219 mm) (measurement H -
Fig. 40) between the side ue gas outlet connection and the
union tee.
- Finish installing the cladding.
E
E
B
C
G
F
H
Fig. 37
Fig. 38
Fig. 39
Fig. 40
H07029330 / DT2001081 – 02
22
English
DT2032326-00
DT2032327-00
DT2032472-01
DT2032440-00
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Piazzetta SABRINA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Piazzetta SABRINA in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info