643476
20
Zoom out
Zoom in
Previous page
1/64
Next page
Pursuant to current regulations on the safety of electrical equipment, you must contact your dealer or a qualied electrician for all and any work
connected with installation, maintenance or servicing that involves access to electrical parts.
Cladding
•Having completed assembly of the stove and installed any external room thermostat, proceed with assembly of the stove cladding, referring to the
ceramic cladding instruction booklet provided with the stove.
5.0 INSTALLATION
•Thanks to Piazzetta technology and R&D, this pellet stove offers the
advantages of the Multifuoco system”, a system EXCLUSIVE to and
PATENTED by Gruppo Piazzetta S.p.A., a true innovation in the eld of
pellet stoves.
•The “Multifuoco system” revolutionises all methods of heat circulation
currently in use in pellet stoves: the heat produced by the rebox is
not only circulated from the lower part of the stove into the room, but
hot air can also be ducted via Ø 3” / (Ø 75 mm) hoses to adjoining
rooms (Fig. 25).
This exclusive oor-standing heat distribution system offers notable
advantages: even spread of temperatures (Fig. 24).
The hot air produced is propelled by two fans and distributed via the
grille at the back of the stove.
•The front grill is equipped with two deectors (Fig. 26) to change the
direction of the heat current as it exits the front of the stove. To deect
the heat current in the desired direction simply adjust the angle of the
deectors (Fig. 27) using the lever provided (Fig. 28).
Instructions for ducting the hot air
•The fan kit, which propels hot air into the room, can be tted with two
Y-elements (one for each motor) which effectively allow the hot air
ow to be doubled up, directing it via a hose also to the rear of the
stove, from where it can then be ducted to adjoining rooms.
a Do not install more than two Y-elements in the stove otherwise
there could be problems of overheating.
•Some examples of possible installation are given below as well as
examples of how to duct the hot air in order to heat other rooms. Such
examples are given purely for demonstration purposes; best efciency
can be obtained using Ø 3” / (Ø 75 mm) coated ducting in accordance
with instructions given in the sub-paragraph “Wall and oor ducting
and with a maximum total hose length of 32.8’ / (10 m).
This length consists of the sum of the single lengths of hoses for each
fan.
a It is of fundamental importance that when ducting heat from
the rear of the stove, the outlet vents near the stove or the
Y-element must not be closed in order to avoid overheating.
In cases where only one rear outlet from the fan is envisaged,
the outlet vent must always be kept open.
DT2010145-04
5.1 MULTIFUOCO SySTEM
Fig. 24
Fig. 25
Fig. 26
Deflectors
Fig. 27 Fig. 28
H07028100/DT2000970 – 01
20
English
DT2010144-02
DT2010071-05
DT2030163-00
DT2030162-00
DT2030610-01
DT2030221-01 DT2030223-01
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Piazzetta P960 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Piazzetta P960 in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info