643476

Piazzetta P960 Manual

19
Zoom out
Zoom in
Previous page
1/64
Next page
The wood pellet is obtained by pressing wood sawdust left over from
the working of natural dried wood. The typical small, cylindrical form is
obtained by passing the material through a die. Thanks to lignin, a natural
element which is released during the pressing of the raw material, the
pellets acquire a good consistency and compactness without requiring
treatment with additives or caking agents.
There are various types of pellet on the market with qualities and
characteristics that vary depending on the processes they have
undergone and the type of wood used in their production.
Since the characteristics and quality of the pellet considerably
affect stove performance, efciency and proper operation, we
recommend that you use high-quality pellets.
Gruppo Piazzetta S.p.A has tested and programmed its stoves and
can ensure best performance and trouble-free operation using
pellets with the following specic characteristics:
Pellet characteristics
Components natural pure wood pellet
Length, approx. ¼” – 1 ¼” / (7 – 30 mm)
Diameter, approx. 0.23” – 0.25” / (6 – 6.5 mm)
Apparent density, approx. 40.5 lb/ft
3
/ (650 kg/m
3
)
Net heat value, approx. 8000 BTU/lb / (5 kWh/kg)
Moisture content, approx. < 8%
Residual ash, approx. < 0,5%
N.B. the above data refer to beech/r wood pellets
To ensure trouble-free operation:
DO NOT use pellets with dimensions other than those recommended by
the manufacturer.
DO NOT use poor quality pellets containing sawdust, bark, maize, resins
or chemical substances, additives or adhesives.
DO NOT use damp pellets.
To prevent accidents or damage to the product we recommend the following:
- unpacking and installation must be carried out by at least two people;
- every operation involving movement of the product must be carried out with the proper tools in full compliance with current safety regulations;
- the packaged product must be kept in the position according to the directions shown by the diagrams and notices on the pack;
- if ropes, straps or chains are used, ensure that they are able to take the weight of the pack and that they are in good condition;
- use slow continuous movements when moving the pack to avoid jerking the ropes, chains, etc.;
- do not tilt the package excessively to avoid toppling;
- never stand in the vicinity of loading/unloading equipment (forklift trucks, cranes etc).
a Unpack the product being careful not to damage or scratch it, take the accessories pack and any pieces of polystyrene or cardboard
used to wedge moveable parts etc. out of the stove rebox.
Keep packaging (plastic bags, polystyrene, etc.) out of reach of children, since it could be a potential source of danger, and dispose
of according to local regulations.
a Installation and assembly of the stove must be carried out by qualied personnel.
Choosing other and unsuitable pellets
- obstructs the grate and ue gas pipes;
- increases fuel consumption;
- reduces efciency;
- means that proper stove operation cannot be guaranteed;
- causes dirt to build up on the glass;
- leaves particles which have failed to burn and heavy cinders.
The presence of moisture in the pellets increases their volume and
causes them to split which in turn causes:
- malfunction of the fuel-loading system;
- inefcient combustion.
Pellets should be stored in a sheltered, dry place.
To use good quality pellets with dimensions and heat-producing
properties other than those recommended above, it will be necessary to
change the stove operating parameters.
a The use of cordwood is prohibited. Do not burn garbage or
ammable uids such as gasoline, naphtha or engine oil.
a This “customisation” of stove settings must be carried out by
specially qualied personnel authorised by Gruppo Piazzetta
S.p.A.
a Using pellets that are out of date or not in conformity with
the manufacturer’s recommendations not only damages the
stove and jeopardises its performance, but can render the
guarantee null and void and relieves the manufacturer of all
liability.
3.0 FUEL
4.0 PREPARING FOR INSTALLATION
H07028100/DT2000970 – 01
19
English
DT2010233-04
DT2010074-06
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Piazzetta P960 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Piazzetta P960 in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info