643480
54
Zoom out
Zoom in
Previous page
1/72
Next page
Description of activity Display
The door open sensor veries that the door to the appliance has been correctly closed.
WHEN ACTIVATED:
If the door remains open, the switch cuts off the power supply to the fuel-loading
auger, thereby stopping the supply of pellets to the grate. If the door remains open for
more than 60 consecutive seconds, the stove starts the shut-down procedure after a
30-second audible beep activates to request that the door be fully closed simultaneously
with the readout “CLOSE SLIDING TOP-DOOR” appearing on the display.
- The readout “ALF 1” appears in the STOVE STATUS mode.
- The readout “SMOKE SAFETY” appears on the display;
- The alarm sounds (if activated).
1
CLOSE
SLIDING
SMOKE
SAFETY
!
SMOKE
SAFETY
!
1
1
12:00 73F
12:00 73F
WHAT TO DO:
- Shut down the stove by holding the ON/OFF key down for several seconds.
- The alarm stops.
- Wait until you are sure that combustion of any pellets remaining in the grate has
stopped.
- Wait until the stove has cooled down, then check for and remove whatever has
caused the safety device to be triggered. Finally, after having cleaned the grate
restart the stove by pressing the ON/OFF key.
Description of activity Display
Connected to the fuel hopper lid, its function is to disable the fuel feed auger motor
when the hopper lid is open as required by UL and ULC standards.
WHEN ACTIVATED:
If the sliding top panel remains open, the lid switch cuts off the power supply to the
fuel-loading auger, thereby stopping the supply of pellets to the grate. If the sliding
top panel remains open for more than 60 consecutive seconds, the stove starts the
shutdown procedure after a 30-second audible beep activates to request that the
sliding top panel be fully closed. The hopper lid must be closed before sliding the panel
into its fully closed position and the readout “CLOSE SLIDING TOP-DOOR” appears on
the display.
a If the sliding top panel is not left in its fully closed position a 30-second
audible beep activates to request that the sliding top panel is manually
returned to its fully closed position, otherwise the stove will go into the
shut-down procedure.
- The readout “ALF 1” appears in the STOVE STATUS mode.
- The readout “SMOKE SAFETY” appears on the display.
- The alarm sounds (if activated).
1
CLOSE
SLIDING
SMOKE
SAFETY
!
SMOKE
SAFETY
!
1
1
12:00 73F
12:00 73F
WHAT TO DO:
- Shut down the stove by holding the ON/OFF key down for several seconds.
- The alarm stops.
- Wait until you are sure that combustion of any pellets remaining in the grate has
stopped.
- Wait until the stove has cooled down, then check for and remove whatever has
caused the safety device to be triggered. Finally, after having cleaned the grate
restart the stove by pressing the ON/OFF key.
FIRE DOOR SENSOR
FUEL HOPPER LID SENSOR
H07031310 / DT2002112 – 00
54
English
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Piazzetta P958 D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Piazzetta P958 D in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info