643480
53
Zoom out
Zoom in
Previous page
1/72
Next page
DT2010994-00
6.19 SAFETY DEVICES
a During operation some parts of the stove (door, handle, ceramic parts) can reach high temperatures.
Remember to maintain the safety distances indicated previously.
Be careful, take all due precautions and always comply with the instructions.
If during operation smoke leaks from any part of the stove or the ue, shut the stove down immediately and ventilate the room. When the stove has
cooled, check for the cause of the leak and if necessary call in specialist personnel.
The stove is tted with several safety devices to guarantee safe operation.
a The safety devices are tted to eliminate the risk of injury to people and pets and damage to property. Tampering or work carried out
by unauthorised personnel can jeopardise this function.
Possible warnings of problems
Simple operating problems can usually be resolved with the help of the following pages.
SMOKE CHAMBER PRESSURE
Sensor Description Display
Pressure switch
ALF 1”
Connected to the ue gas outlet, its function is to control the vacuum
inside the outlet duct so that the stove can be used in all safety.
WHEN ACTIVATED
If correct operating conditions in the ue gas outlet change (incorrect
installation, blockages or obstructions in the ue, poor maintenance,
unfavourable weather conditions such as persistent wind, etc.) the
pressure switch cuts off the power supply to the fuel-loading auger,
thereby stopping the supply of pellets to the grate and starting the stove
shutdown process.
The readout “ALF 1 appears in the STOVE STATUS mode.
The readout “SMOKE SAFETY “ appears on the display.
After approx. 60 seconds the alarm sounds (if activated).
SMOKE
SAFETY
!
SMOKE
SAFETY
!
1
1
12:00 73F
12:00 73F
WHAT TO DO
Shut down the stove by holding the ON/OFF key down for several
seconds.
The alarm stops.
Wait until you are sure that combustion of any pellets remaining in the
grate has stopped.
Wait until the stove has cooled down, then check for and remove
whatever has caused the safety device to be triggered. Finally, after
having cleaned the grate restart the stove by pressing the ON/OFF key.
Pressure switch
ALF 2”
Its function is to check correct operation of the pressure switch so that the
stove can be used in all safety.
WHEN ACTIVATED
It activates during the “START” stage of the stove (see “STARTING THE
STOVE” table).
If an anomaly is detected in the pressure switch, the readout “ALF 2
appears in the STOVE STATUS mode.
The readout “SMOKE SAFETY appears on the display.
After approx. 60 seconds the alarm sounds (if activated).
SMOKE
SAFETY
!
SMOKE
SAFETY
!
1
1
12:00 73F
12:00 73F
WHAT TO DO
Shut down the stove by holding the ON/OFF key down for several
seconds.
The alarm stops.
Call the After-Sales Service Centre. DT2040095-00
H07031310 / DT2002112 – 00
53
English
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Piazzetta P958 D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Piazzetta P958 D in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info