24
25
Important points
• Do not use two transmitters on the same
FM channel
• Do not use water or fluids for cleaning
• Use only original Phonak accessories
• Do not use EasyLink in locations where it is
forbidden to use electronic devices, for instance
in airplanes.
• Be aware that FM signals might also be picked
up and overheard by other receivers.
• Before using the system in another country,
contact your hearingcare professional to make sure
your radio channel is permitted in that country.
• The EasyLink may only be repaired by an
authorized service center.
The symbol with the crossed out disposal bin
indicates that FM equipment shall not be
treated as household waste. Please hand over
your old or unused FM equipment to the applicable
collection point for the recycling of electrical and
electronic equipment or bring your old FM equipment
to your hearing care professional for appropriate
disposal. By ensuring this product is disposed of
correctly, you will help prevent potential negative
effects on the environment and human health.
For professionals:
Changing the FM channel
If the radio channel used in EasyLink is frequently
disturbed by an external source of interference, the
hearingcare professional can switch the EasyLink to
another radio channel.
1) Switch on the EasyLink by pressing
the button for two seconds
2) Using a pen, press the push button, as pictured.
After one second, the channel displayed in the LCD
will change. Hold the button down until
the desired channel is displayed.
3) Release the button.
The channel number in
the LCD will stop
blinking after a few
seconds.
4) Set the default channel
of the iLinks or
MicroLink receivers to
the same channel using
the FM Successware.