23
22
Switch settings on MLxS
For correct MLxS switch settings for use with Phonak
hearing instruments, please refer to the respective
hearing instrument user guide.
For all other hearing instrument brands, the MLxS
switch setting depends on the type of the hearing
instrument.
Ask your hearingcare professionals about the right
switch settings for your hearing instruments.
MLxS switch
FM receivers
Setup of FM receivers
Users of iLink or Phonak hearing instruments should
check recommended settings of the FM receivers in the
respective hearing instrument user guide.
Principal benefits of MicroLink receivers
Default channel
iLink and MicroLink receivers are programmed with a
default channel which activates at startup. It can be
modified at Phonak service centers.
Channel synchronization
EasyLink can change your iLink or MicroLink receiver
channel directly “over the air” within a distance of 10–20
cm (4–8 inches). This feature ensures EasyLink and the
iLink or MicroLink receivers use the same radio channel.
Standby mode
This function helps economize on power. Switch off
the transmitter and about 40 seconds later, your
iLinks or MicroLink receivers automatically enter the
standby mode. They switch to normal FM operation
automatically if the EasyLink is switched on.