492013
2
Zoom out
Zoom in
Previous page
1/7
Next page
Elite Amplier Owners Manual
© 2012 Phoenix Gold • www.phoenixgold.com
© 2012 Phoenix Gold • www.phoenixgold.com
Elite Amplier Owners Manual
ELITE.1
• Class D Topology
• Overbuilt Quad Unregulated Power Supplies
• Handwound Power Supply Transformers
• Isolated Pre-Amp Section
• Crossovers have 41 Detents for Exact Frequency Selection
• Aluminum Shaft Potentiometers
• Panel Mounted RCAs
• Clip Indicators
• Extruded Aluminum Heatsink with Evenow Technology
• Integrated Cooling via Endcap Vents
• Each Amp is Shipped in its Own Soft Felt Protective Cover
• High Temperature Plexiglass Cover
• RMD - Remote Voltage Display Ready
• Remote Level Control with Clip Indicator Included
• Linkable or strappable to an additional Elite.1
• Audio Precision Quality Control Verication
• Power Output Birth Certicate
ELITE.2/4
• Class A/B Topology
• Burr Brown Operational Ampliers
• Monolithic Signal Capacitors
• Massive Dual Package Sanken Output Devices
• Overbuilt Dual Unregulated Power Supplies
• Handwound Power Supply Transformers
Triple Darlington Output Stage
• Isolated Pre-Amp Section
• Crossovers have 41 Detents for Exact Frequency Selection
• Aluminum Shaft Potentiometers
• Panel Mounted RCAs
• Clip Indicators
• Extruded Aluminum Heatsink with Evenow Technology
• User Adjustable Temperature Controlled Fan Cooling System
• Integrated Cooling via Endcap Vents
• Each Amp is Shipped in its Own Soft Felt Protective Cover
• High Temperature Plexiglass Cover
• RMD - Remote Voltage Display Ready
• Remote Level Control with Clip Indicator Included
• Audio Precision Quality Control Verication
• Power Output Birth Certicate
FEATURES
ELITE.1
Frequency Response: ± 1dB from 20Hz to 300Hz
Signal to Noise Ratio: >100dB
Low Pass Crossover: 24dB per Octave
Subsonic Filter: 24dB per Octave
Low Pass Crossover Range: 30Hz to 300Hz
Subsonic Crossover Range: 10Hz to 55Hz
Bass Boost @ 45Hz: 0 to +18dB
Low Level Input Range: 200 millivolts to 8 volts
Lowest Recommend Load: 1 ohm
Typical Eciency: 85%
Damping Factor: Greater than 200
ELITE.2
Frequency Response: ± 1dB from 10Hz to 50kHz
Signal to Noise Ratio: >110dB
High and Low Pass Crossovers: 18dB per Octave
High Pass Crossover Range: 20Hz to 4kHz
Low Pass Crossover Range: 40Hz to 4kHz
Low Level Input Range: 200 millivolts to 8 volts
Lowest Recommend Load: 2 ohms Bridged or 1 ohm Stereo
Typical Eciency: 55%
Damping Factor Greater than 200
RMS Power 14.4Vdc ≤ 1% THD 2400 x 1 @ 2 ohms
3200 x 1 @ 1 ohm
Note: A power birth certicate is included for each amplier. Elite
ampliers are VERY CONSERVATIVELY rated and will exceed the
RMS power rating by up to 30%.
Recommended Fuse Size: 300 amp
Power/Ground Wire Size: 1/0 Gauge
Dimensions: 23.3” L x 10.5” W x 2.6” H
592mm L x 267mm W x 66mm H
RMS Power 14.4Vdc ≤1% THD 250 x 2 @ 4 ohms Stereo
400 x 2 @ 2 ohms Stereo
500 x 2 @ 1 ohm Stereo*
800 x 1 @ 4 ohms Bridged
1000 x 1 @ 2 ohms Bridged*
Note: A power birth certicate is included for each amplier. Elite
ampliers are VERY CONSERVATIVELY rated and will exceed the
RMS power rating by up to 30%.
*Reactive Load Measurement
Recommended Fuse Size: 100 amp
Power/Ground Wire Size: 1/0 Gauge
Dimensions: 23.3” L x 10.5” W x 2.6” H
592mm L x 267mm W x 66mm H
SPECIFICATIONS
ELITE.4
Frequency Response: ± 1dB from 10Hz to 50kHz
Signal to Noise Ratio: >110dB
High and Low Pass Crossovers: 18dB per Octave
High Pass Crossover Range: 20Hz to 4kHz
Low Pass Crossover Range: 40Hz to 4kHz
Low Level Input Range: 200 millivolts to 8 volts
Lowest Recommend Load: 2 ohms Bridged or 1 ohm Stereo
Typical Eciency: 55%
Damping Factor Greater than 200
RMS Power 14.4Vdc ≤1% THD 150 x 4 @ 4 ohms Stereo
250 x 4 @ 2 ohms Stereo
300 x 4 @ 1 ohm Stereo*
500 x 2 @ 4 ohms Bridged
600 x 2 @ 2 ohms Bridged*
Note: A power birth certicate is included for each amplier. Elite
ampliers are VERY CONSERVATIVELY rated and will exceed the
RMS power rating above by up to 30%.
*Reactive Load Measurement
Recommended Fuse Size: 100 amp
Power/Ground Wire Size: 1/0 Gauge
Dimensions: 23.3” L x 10.5” W x 2.6” H
592mm L x 267mm W x 66mm H
A NOTE ABOUT SPECIFICATIONS....
Elite ampliers were engineered to be the best sounding mobile ampliers on the
planet. Numbers on this sheet of paper can not truly convey the dynamics and
realism these ampliers can deliver. Enjoy
!
INTRODUCTION:
Thank you for purchasing a Phoenix Gold Elite amplier, we are condent it will be the nest amplier you have
ever owned.
The Elite ampliers feature only the highest grade of audio components such as Burr Brown op-amps,
Monolithic signal capacitors, and dual-package Sanken output transistors. The result is unparalleled sonic
performance in a mobile audio amplier. With proper installation this amplier is overbuilt to last a lifetime,
thank you for choosing Phoenix Gold.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Phoenix Gold Elite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Phoenix Gold Elite in the language / languages: English as an attachment in your email.

The manual is 5,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info