462271
24
Zoom out
Zoom in
Previous page
1/39
Next page
25
Digital TBC/NR
Your VCR is equipped with the Digital
TBC (Time Base Corrector) that
removes jitter from fluctuating video
signals to deliver a stable picture even
with old tapes and rental cassettes. The
on/off of Digital 3-DNR (Noise
Reduction) which cuts noise and
enables clear picture reproduction is
also linked to this function.
*The default setting is ON.
We recommend that you use the Digital
TBC feature when...
... playing a tape recorded on a
camcorder.
... playing a tape repeatedly.
... using this VCR as the player for tape
duplication.
1Set Digital TBC/NR Mode
Press DIGITAL TBC/NR on the front
panel so that the button lights up.
Pressing the button again turns off
this function. The lights goes off.
If you playback a tape recorded
under poor TV reception condition,
there may be cases where the picture
becomes more stable with Digital
TBC/NR set to off.
When playing back a MESECAM
tape, Digital TBC/NR does not
function even though the TBC/NR
button is lit.
Digital 3R
Digital 3R picture system applies edge
correction to the luminance signal to
enhance detail.
1Select VCR Set Up Screen
1 Press VCR.
2 Press MENU.
3 Press 5 or to select VCR SET
UP then press OK/STATUS.
2Set Digital 3R Mode
1 Press 5 or
to select
DIGITAL
3R.
2 Press 4 to
select one
of the
following:
ON: Normally select this mode.
OFF: No picture adjustment will be
done.
It is recommended to keep DIGITAL
3R set to ON.
Depending on the type of tape being
used, picture quality may be better
with DIGITAL 3R set to OFF.
3Finish Setting
Press MENU.
Receiving/Recording NICAM
Stereo And Bilingual
Programmes
This VCR can receive and record
stereo and bilingual programmes,
including the NICAM (Digital Stereo
Sound) and A2 (Sound-Multiplex)
broadcasts.
When the recorder is tuned to a
different station, the type of broadcast
being received will be displayed on the
TV screen for a few seconds.
Notes:
Stereo programmes (A2) are
automatically recorded in stereo on the
Hi-Fi audio track (with the normal audio
track recording mixed L and R channel
sound).
Bilingual programmes (A2) are
automatically recorded in bilingual on the
Hi-Fi audio track. The main soundtrack
will be recorded on the normal audio
track.
The NICAM audio programme will be
recorded on the Hi-Fi audio track, and
the Standard audio programme on the
normal audio track.
If the quality of stereo sound being
received is poor, the broadcast will be
received in monaural with better quality.
Before playing back a programme recorded
in stereo, or a bilingual programme, refer to
Selecting Monitor Sound.
•“O.S.D. must be set to ON or the
on screen displays will not appear.
Type of Broadcast
On-screen Display
Being Received
A2 Stereo STEREO
A2 Bilingual BILINGUAL
Regular Monaural (none)
NICAM Stereo NICAM STEREO
NICAM Bilingual NICAM BILINGUAL
NICAM Monaural NICAM
Selecting Monitor Sound
This VCR is capable of recording three
soundtracks (Hi-Fi L, Hi-Fi R, and
normal) and will play back the one you
select. Also, this VCR can receive and
record stereo and bilingual programmes
and you can select the sound that you
want to listen to.
1Select Monitor Sound
Press AUDIO/MUTE. Each time you
pressed the button, the output sound
changes as follows.
HIFI (On-screen display)
+ (Display window)
For Hi-Fi stereo tapes
OR
For stereo programme
HIFI L (On-screen display)
(Display window)
For main audio of bilingual tapes
OR
For main audio of bilingual programme
HIFI R (On-screen display)
(Display window)
For sub audio of bilingual tapes
OR
For sub audio of bilingual programme
NORMAL MONO (On-screen
display)
NORM (Display window)
For audio - dubbed tapes
For standard (regular monaural) audio
of NICAM broadcast
HIFI + NORMAL (On-screen
display)
+ + NORM (Display window)
For audio - dubbed tapes
Notes:
HIFI ( + ) should normally be
selected during playback. In this mode,
Hi-Fi stereo tapes are played back in stereo,
and the normal audio track is played back
automatically for tapes with only normal
audio.
DSPC ON
O. S. D. ON
DIRECT REC ON
AUTO SP=LP TIMER OFF
\DIGITAL 3R ON
POWER SAVE OFF
AUTO SAT
RECORD LINK OFF
NEXT PAGE
SELECT : 5∞ CHANGE :4
END : MENU
Untitled-2 16/08/2000, 15:3825
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips VR1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips VR1100 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info