54447
31
Zoom out
Zoom in
Previous page
1/39
Next page
32
A
1 Programme numbers
2 Channel position numbers
3 Start time
4 Stop time
5 Start date
If the programme has worked
once for the Daily recording,
DAILY will be shown instead
of the start date.
If the programme has worked
once for the Weekly recording,
the following weeks date will be
shown instead of the start date.
How to see the programme list
12 3 4 5
VPS/PDC Recording
Now available from some TV stations, PDC
(Programme Delivery Control) and VPS (Video
Programmes System) are services designed to
assure safe, accurate timer recording. With this
system, special code signals are transmitted
together with the audio/video signals. These code
signals control your video recorder and have
precedence over the advertised times you may
have preset into the timer. This means that your
recorder will start and stop recording when the
preset TV programmes actually start and end
even if the broadcast time of a preset TV
programme is changed.
NOTES:
When you use Timer Programming, set the
start time (VPS or PDC time) exactly as
advertised in the TV listing. A different time
than advertised will result in no recording.
VPS/PDC recording is also possible when a
satellite tuner or a cable system is connected
to AV2 (L-2) IN/DECODER on your recorder.
VPS/PDC recording is also possible via the
AV1 (L-1) IN/OUT connector.
How to check if the station being received
transmits a VPS/PDC signal
1 Press OK/STATUS or DISPLAY until the
channel position appears on the display panel.
2 Hold down SKIP SEARCH for about 5
seconds.
VPS/PDC appears blinking on the display
panel.
If a VPS/PDC signal is detected from
the station, VPS/PDC will stop blinking.
If no VPS/PDC signal is detected from the
station, VPS/PDC will blink at a slower
rate.
3 Press OK/STATUS, DISPLAY or SKIP
SEARCH again to return to normal display.
7 Press TIMER to exit from the menu
operations, if necessary.
PR CH START STOP DATE
1 12 08:00 10:00 15/06
2 10 10:00 10:45 14/08
3 45 03:00 03:15 D15/10
4 24 11:30 13:00 DAILY
5 20 20:00 21:00 W18/
6
7
8
NEXT : OK
END : TIMER
To check, edit or erase the
programmes
1 Press VCR.
2 Turn on the VCR and TV.
3 Press TIMER.
4 Press 5 or to select
PROGRAM REVIEW then press
or OK/STATUS. The list of the
timer recording programmes appears.
5 Press OK/STATUS repeatedly to
view the more detailed programme
information.
When you press the button for the first
time, the detailed programme
information for Programme 1 appears.
By pressing this button repeatedly, you
can review the detailed information of
all other programmes.
The display panel shows the pro-
gramme start time. Pressing DISPLAY
changes the display to the programme
stop time, then the date and the
channel position.
6 If you want to change the
programme setting shown on the TV
screen, press the following buttons:
START +/ : Changes the start time.
STOP +/ : Changes the stop time.
SPEED : Changes the tape speed.
VPS/PDC : Changes the setting of
the video programme
system.
DATE +/ : Changes the date.
CH 5/ : Changes the channel.
If you want to erase the
programme setting shown on the
TV screen, press CLEAR. The
detailed information of the next
programme appears.
ONE TIME PROGRAM
PROGRAM 1
TV PROG +/- 12
START+/- 08:00
STOP +/- 10:00
REC SPEED SP
VPS/PDC ON
DATE +/- 15/06/00
THURSDAY
ERASE : CLEAR END : TIMER
NEXT : OK PREV : 3
PR CH START STOP DATE
1 12 08:00 10:00 15/06
2 10 10:00 10:45 14/08
3 45 03:00 03:15 D15/10
4 24 11:30 13:00 DAILY
5 20 20:00 21:00 W18/10
6
7
8
NEXT : OK
END : TIMER
Untitled-2 16/08/2000, 15:3832
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips VR110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips VR110 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips VR110

Philips VR110 User Manual - German - 39 pages

Philips VR110 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info