54447

Philips VR110 Manual

26
Zoom out
Zoom in
Previous page
1/39
Next page
— 27 —
Selecting Recording Format
When shipped from the factory, this
VCR has been set to select
automatically S-VHS format for
recording on an S-VHS tape and VHS
format for recording on a VHS tape. If
you want to make a recording using
VHS format on an S-VHS tape, follow
the procedure below.
1Select VCR Set Up Screen
1 Press VCR.
2 Press MENU.
3 Press 5 or ∞ to select “VCR SET
UP” then press OK/STATUS.
The VCR Set Up menu appears.
2Select Recording Format
1 Press 5 or ∞ to select “S-VHS”.
2 Press 4.
Each time you press the button, the
setting changes.
ON:
Normally select this.
OFF:
Select this when you want to make a
recording using the VHS format on
an S-VHS tape.
3Finish Setting
Press MENU.
Notes:
• When playing a tape that has been
recorded in S-VHS, the S-VHS indicator
lights on the display panel regardless of
the “S-VHS” mode setting.
Selecting AV1 and AV2
Output/Input signal
This VCR has two AV terminals on the
rear panel. You have to correctly set the
input or output signal depending on the
type of unit connected to these
terminals.
1Select VCR Set Up Screen
1 Press VCR.
2 Press MENU.
3 Press 5 or ∞ to select “OUTPUT/
INPUT SET UP” ,then press OK/
STATUS.
The Output/Input Set Up menu
appears.
2Select AV1, AV2
If you are connected to the AV1 (L-1)
IN/OUT connector and use this VCR
as a player:
1 Press 5 or ∞ to select “A/V1
OUTPUT”.
2 Press 4 to select one of the
following:
VIDEO : If a connected device’s
input is compatible only
with regular video signals.
S-VIDEO : If a connected device’s
input is compatible with
Y/C (S-Video) signals.
This setting will let you
take advantage of higher
quality S-VHS pictures.
• If “A/V2 SELECT” is set to
“DECODER”, it is impossible to set
“A/V1 OUTPUT” to “S-VIDEO”.
3 Press MENU.
If you are connected to the AV1 IN/
OUT connector and use this VCR as
a recorder:
1 Press 5 or ∞ to select “A/V1
INPUT”.
2 Press 4 to select VIDEO or
S-VIDEO depending on the
connected device output signal.
3 Press MENU to exit the menu
operations.
• If the “A/V1 OUTPUT” is set to
“S-VIDEO”, it is impossible to set
“A/V1 INPUT” to “S-VIDEO”.
If you are connected to the AV2
(L-2) IN/DECODER connector;
1 Press 5 or ∞ to select “A/V2
SELECT”.
2 Press 4 to select one of the
following:
A/V : To use this recorder as
the recording deck,
where the player is
connected to the AV2
(L-2) IN/DECODER
connector, or to use the
satellite tuner con-
nected to the AV2 (L-2)
IN/DECODER
connector.
DECODER : To use a decoder
connected to the AV2
(L-2) IN/DECODER
connector.
SAT : To view a satellite
programme with the
TV set while the
recorder is turned off.
(✈P. 34)
• If the “A/V1 OUTPUT” is set to
“S-VIDEO”, it is impossible to set
“A/V2 SELECT” to “DECODER”.
• If “A/V2 SELECT” is set to
“SAT”, “SAT” appears at channel
position display instead of “L-2”.
3 Then, select the video input signal:
Press 5 or ∞ to select “A/V2
INPUT”.
4 Press 4 to select one of the
following:
VIDEO : If a connected device’s
output is compatible only
with regular video signals.
S-VIDEO : If a connected device’s
output is compatible with
Y/C (S-Video) signals.
This setting will let you
take advantage of higher
quality S-VHS pictures.
5 Press MENU to exit the menu
operation.
• If you are not connecting a
decoder or satellite tuner to the
A/V2 (L-2) IN/DECODER
connector, leave “A/V2
SELECT” set to “A/V”.
• If “A/V2 SELECT” is set to
“DECODER”, it is impossible to
set “A/V2 INPUT” to
“S-VIDEO”.
• The default setting of "A/V2
SELECT" is “A/V”; if the VCR’s
memory backup has expired due
to a power cut or because the
AC was removed from the VCR,
“A/V” will be automatically
selected when the power is
restored to the VCR. If you are
using a decoder or satellite
tuner, be sure to set “A/V2
SELECT” back to appropriate
setting.
PREVIOUS PAGE
\S-VHS ON
COLOUR SYSTEM PAL/NTSC
SELECT : 5∞ CHANGE :4
END : MENU
OUTPUT/INPUT SET UP
A/V1 OUTPUT VIDEO
\A/V1 INPUT VIDEO
A/V2 SELECT A/V
A/V2 INPUT VIDEO
SELECT : 5∞ CHANGE :4
END : MENU
Untitled-2 16/08/2000, 15:3827
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips VR110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips VR110 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips VR110

Philips VR110 User Manual - German - 39 pages

Philips VR110 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info