54447
25
Zoom out
Zoom in
Previous page
1/39
Next page
26
Using On-Screen Display
You can display the VCR operating
status on the TV screen.
For the information about what you can
see on the TV screen, see page 6.
1Select VCR Set Up Screen
1 Press VCR.
2 Press MENU.
3 Press 5 or to select VCR SET
UP then press OK/STATUS.
The VCR Set Up menu appears.
2Set OSD
1 Press 5 or to select O.S.D.
2 Press 3.
Each time you press the button, the
setting changes as follows:
ON:
The VCR operating status appears
on screen (The default setting is
ON).
OFF:
The VCR operating status does not
appear on screen.
3Finish Setting
Press MENU.
Notes:
When you use this VCR as the player for
tape duplication, be sure to set O.S.D.
to OFF before starting.
During playback, the operation mode
indicators may be disturbed depending on
the type of tape being used.
One Touch Recording (OTR)
The OTR function lets you quickly
specify how long you want a recording
to continue. You do not have to
programme the timer.
Make sure....
The record tab on the cassette is not
removed.
Your VCR, TV and antenna are
connected correctly.
1On TV
1 Turn on the TV.
2 Select the video channel (or video
input).
2On VCR
Insert a cassette with the record tab in
place.
The VCR turns on.
If a cassette is already in the VCR, turn
on the VCR.
3Select Channel Position
Press CH 5/ on the remote control
(or PROGRAMME 5/ on the front
panel) or Number buttons to select the
channel position to record.
4Start OTR
Press REC/OTR twice.
Recording starts immediately, and the
(Record) indicator lights up and
blinks on the display.
5Select Recording Length
Press REC/OTR repeatedly until the
desired recording length appears.
Each time you press the button, the
recording length increases in 30-minute
intervals.
=0:30=1:00=1:30 5:30=6:00
REC (Normal recording)
++
++
+
.....
DSPC ON
\O. S. D. ON
DIRECT REC ON
AUTO SP=LP TIMER OFF
DIGITAL 3R ON
POWER SAVE OFF
AUTO SAT
RECORD LINK OFF
NEXT PAGE
SELECT : 5∞ CHANGE :4
END : MENU
To change the recording
length during an OTR
Press REC/OTR until the desired
length appears.
To cancel an OTR
Press STOP 7 to stop recording before
the preset recording length is reached.
If you want to cancel the OTR mode
but continue recording, press
REC/OTR several times until
(Record) indicator stops blinking.
Notes on the indications on the display
while an OTR operation
During recording, the displayed time
counts down. When 0:00 is reached,
recording stops and the VCR turns off
automatically.
If an OTR is engaged during pause, the
displayed time counts down normally, but
recording does not begin until you cancel
the pause.
Record End Search
This function enables you to search
forward to the next unrecorded portion
of the tape (or to the point at which
recording was stopped).
1 Press the REC END SEARCH
button. The VCR begins fast
forwarding or rewinding to find the
blank portion or the recording end
portion on the tape.SEARCHING
FOR REC END will appear on the
screen during the search.
2 The VCR automatically stop when
the blank portion or the recording
end portion is reached. REC END
SEARCH COMPLETED will
appear on the screen briefly.
The tape remaining tape time also
appears on the display panel.
A
DVANCED
O
PERATIONS
(CONTINUED)
Untitled-2 16/08/2000, 15:3826
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips VR110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips VR110 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips VR110

Philips VR110 User Manual - German - 39 pages

Philips VR110 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info