54447
13
Zoom out
Zoom in
Previous page
1/39
Next page
14
S
ETTING
U
P
(CONTINUED)
Preset Download
Before performing the following steps, be sure to finish Preparation on pages 1011.
Do NOT press any button on the front panel or remote control until display window
shows either the display as illustrated in step 2 or “– :––.
1 If you are referring to the display window, press
5/ to select CH –– and press OK/STATUS.
If you are referring to the on-screen display, press 5/
to select FOLLOW TV and press OK/STATUS.
FOLLOW TV
PLEASE WAIT
END : MENU
AUTO CH. SET
\FOLLOW TV
SELECT: 5
CONFIRM: OK
END : MENU
GUIDE CH. SET
PLEASE WAIT
END : MENU
If the correct current time is displayed on the display window, the Auto Channel Set and Clock Set
have been completed successfully. Go to step 3.
If 1 (channel position) is displayed on the display window, the Auto Clock Set has not completed
(only the Auto Channel Set has). Go to step 3 and then perform Clock Setting manually. (P.20)
You can check if the Guide Channel numbers have been set correctly when you perform S
HOWVIEW Timer
Recording (P.29); if the correct channel position number is displayed on S
HOWVIEW Programme screen, this
confirms that the Guide Channel number for the SHOWVIEW number you enter has been set correctly.
3Set the Video Channel manually. (P. 15)
4Press PROGRAMME
5/
on the front panel (or CH
5/
on the remote control) to make sure that all necessary
stations have been stored in the VCRs memory.
If station names (ID P.19) have also been stored in the VCRs memory, the station name will be displayed at the
top left corner of the screen for about 5 seconds when the VCR is tuned to a different station.
If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or station
names, see pages 1718.
If no station is stored in the VCRs memory, make sure the SCART cable is connected correctly and press
OK/STATUS to re-perform Preset Download.
Notes:
In the area where no TV station transmits a PDC signal, the VCR can perform neither auto clock set nor auto Guide
Channel number set.
If there is a power cut, or if you press STANDBY/ON, POWER or MENU while downloading or set up is on progress, it will be
interrupted; be sure to turn off the VCR power once and try again from the beginning.
Auto clock may not function properly depending on the reception condition.
When you perform Preset Download function, be sure to use fullywired 21-pin SCART cable.
On this VCR, the characters available for stations name (ID) are A-Z, 0-9), -, *, + and (space). Some downloaded stations name
may differ from those of your TV (
P.19).
Important
7
In certain reception conditions, station names may not be stored correctly, and auto Guide Channel Number Set may not work
properly. If the Guide Channel numbers are not set properly, when you timer-record a TV programme using the SHOWVIEW system, the
VCR will record a TV programme of a different station. When programming the timer using the SHOWVIEW system, be sure to check
whether the channel position on which your VCR receives the broadcasting station you wish to record is selected. (
P.29)
]
2
Channel position number increases from
CH 1.
Untitled-2 16/08/2000, 15:3614
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips VR110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips VR110 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips VR110

Philips VR110 User Manual - German - 39 pages

Philips VR110 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info