54447
11
Zoom out
Zoom in
Previous page
1/39
Next page
12
Do NOT press any button on the front panel or remote control until the display window shows either the display as
illustrated in step 2 or “– :––.
As AUTO CH. SET
progresses, the 7 mark
moves from left to right.
1 If you are referring to the display window, press
5/ to select Auto and press OK/STATUS.
S
ETTING
U
P
(CONTINUED)
Auto Set Up
If you are referring to the on-screen display, press 5/ to
select AUTO CH. SET and press OK/STATUS.
AUTO CH. SET
PLEASE WAIT
END : MENU
0
+++
Beginning
End
\ AUTO CH. SET
FOLLOW TV
SELECT:
5
CONFIRM: OK
END : MENU
2 If you have connected the VCR to TV via an RF
cable only (RF connection), the channel that is
shown on the display window is your Video Channel.
If you have selected MAGYARORSZAG (36),
CESKA REPUBLIKA (42), POLSKA (48) or
OTHER EASTERN EUROPE (EE) in Preparation
section, 2OUT appears instead of 1OUT.
To view picture signals from the VCR, set TV to the
Video Channel. Refer to the instructions supplied
with TV set for how to do this.
If you have connected the VCR to TV via both an RF
cable and a SCART cable or an S-Video cable (SCART
connection or S-Video connection), you do not need the
video channel so you have to set the video channel to
off.
Press until the video channel changes to “– –” (off).
To view picture signals from the VCR, set the TV to its
AV mode. Refer to the instructions supplied with the
TV set for how to do this.
If “– –:–– appears, both Auto Channel Set and Auto Clock Set have failed.
Make sure the TV antenna cable is connected correctly and press OK/STATUS to re-perform the Auto Set Up.
3Press OK/STATUS.
If the correct current time is displayed on the display window, the Auto Channel Set and Clock Set
have been completed successfully. Go to step 4.
If 1 (channel position) is displayed on the display window, the Auto Clock Set has not completed
(only the Auto Channel Set has). Go to step 4 and then perform Clock Set manually. (P.20)
You can check if the Guide Channel numbers have been set correctly when you perform S
HOWVIEW Timer
Recording (P.29); if the correct channel position number is displayed on S
HOWVIEW Programme screen, this
confirms that the Guide Channel number for the SHOWVIEW number you enter has been set correctly.
4Press PROGRAMME
5/
on the front panel (or CH
5/
on the remote control) to make sure that all necessary
stations have been stored in the VCRs memory.
If station names (ID P.19) have also been stored in the VCRs memory, the station name will be displayed at the
top left corner of the screen for about 5 seconds when the VCR is tuned to a different station.
If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or station
names, see pages 1718.
If no station is stored in the VCRs memory, make sure the TV antenna cable is connected correctly and turn off the
VCR power once, then turn it back on again. Re-perform from Preparation on page 10.
Untitled-2 16/08/2000, 15:3612
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips VR110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips VR110 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips VR110

Philips VR110 User Manual - German - 39 pages

Philips VR110 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info