10
Press the POWER button to turn off the VCR. The
r
light
will appear on the display panel. (The
r
light and the Cassette-
Inside light will flash when you turn off the VCR if there is not a
tape in the VCR.)
9
Press the OK/STATUS or TIMER button. PROGRAM WAS
COMPLETED/PLEASE TURN OFF VCR FOR TIMER RECORD-
ING will appear on the screen. If PROGRAM NOT COMPLETED
appears, try again from step 1.
Quick Programming (cont’d) 43
• With ShowGuard, the VCR keeps your
timer recordings, even if the power
fails. However, the time and other
menu settings may be lost if the
power fails for more than three min-
utes. When the power is restored, the
following will occur:
The VCR will automatically restore the
time setting if you are using AUTO
CLOCK. Auto will flash on the display
panel. When the time setting is
restored, the current time will appear
on the display panel.
After the time setting is restored, each
timer recording you have set will occur
as programmed, unless the recording
was to occur during the power outage.
Helpful Hint
The VCR must be turned off
for a timer recording to take place.
Leave the Cable Box/DBS on, if applicable.
Make sure a tape is in the VCR.
10
9
