Manual Philips SRU 3005 (page 9 of 29) (English, French, Spanish)

105793

Zoom out

Zoom in

1/29

1716

The learning feature allows you to “learn” functions

from your original remote control. For example - you may

want to use your remote to operate the RANDOM PLAY

feature from your original CD remote control. This

remote is equipped with an “easy learning” feature that

allows you to “learn” features (such as RANDOM PLAY

from your original CD remote) by following the steps

below, and on the next page:

1. Press and hold the SETUP button until the red

indicator turns on, then release the button.

2. Press and release the desired mode button (TV,

VCR, etc.), the red indicator blinks then stays on.

3. Press and release the LEARN button, the red

indicator blinks then stays on.

4. Press and release the Learning Remote button that

you want to teach (e.g. POWER).

5. Point both remotes facing each other by approxi-

mately 1 inch apart (see tips on page 14).

6. Press and hold the Original Remote button (e.g.

Power) until the red indicator blinks once and stays

on. If there is a learning problem, the indicator blinks

for three seconds and stays on. If this happens,

repeat Steps 4 to 6.

7. Repeat Steps 4-6 for other buttons you want to

learn.

8. Press and release the SETUP button when all desired

remote commands are learned. Code Learning is now

complete.

Learning Commands

Line up your remotes (that you’re learning from) in front of

the Learning remote, on a hard surface approx. 1 inch apart.

This feature assists you in identifying where your

original remotes IR transmitter is located and is

particularly useful if your original remote’s IR

transmitter is hidden behind a lens.

1. Point both remotes facing each other by

approximately 1 inch apart (see Tips on Learning on

previous pages)

2. Press and hold the SETUP button until the red

indicator turns on, then release the button.

3. Press and release the desired Mode button (TV,

VCR, etc.), the red indicator blinks then stays on.

4. Press and release the LEARN button, the red

indicator blinks then stays on.

5. Press and hold any Original Remote button and

move the Original Remote to the left and right, and/

or, up and down in front of the Learning remote IR

transmitter. The red indicator will remain on if no IR

from the Original remote is found and the red

indicator will blink on and off more rapidly when the

IR transmitters are lining up. The point where the

red indicator blinks most rapidly is where the two IR

transmitters are aligned. Note some original remotes

will only transmit IR on the initial button press then

stop. In these cases, quickly press and release the

original remote button repeatedly during this

procedure.

6. You can now learn a button from your original

remote by continuing from “Step 4” in the

“Learning Commands” section on the next page, or,

to exit at this point, press and release the SETUP

button

IR Transmitter Finder Feature

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips SRU 3005 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips SRU 3005

Philips SRU 3005 User Manual - German - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips SRU 3005 Manual

Product: