Manual Philips SRU 3005 (page 8 of 29) (English, French, Spanish)

105793

Zoom out

Zoom in

1/29

1514

Code Learning

The learning feature lets you “learn” functions from

your original remote control. For example - you may

want to use your remote to operate the RANDOM

PLAY feature from your original CD remote control.

This remote is equipped with an “easy learning” feature

that lets you “learn” features (such as RANDOM PLAY

from your original CD remote).

Tips On Learning

You can only learn one device type under any one

Mode button e.g. only learn TV codes under the TV

Mode, VCR codes under the VCR Mode, etc. If you are

trying to learn from a “Universal” remote, it might have

more than one code type stored under a Mode. Try

learning from another remote to see if there’s a problem

with the type or brand of remote you are trying to learn

from.

a. Some functions from some types of remotes might

not be able to be learned.

b. No functions may be stored under LEARN, or

SETUP buttons.

c. Only one original device type can be learned per

individual Mode.

d. Use fresh batteries for both the Learning Remote

and the Original Remote.

e. Keep at least three feet away from incandescent or

low-energy lights when learning.

f. Perform a Master Clear (see page 18) before learning

and try learning 2 or 3 commands initially. Then

carry out a Master Clear before completely learning

your original remote’s commands.

g. Place the original remote end-to-end with the

Learning Remote so the IR transmitters on both

remotes are directly in line with each other. You may

need to adjust the height of either remote to achieve

this. Use the IR Transmitter Finder feature to assist

you.

h. Keep the distance between the two remotes to

approximately 1 inch and do not move or change the

distance between the two remotes until you have

learned all the required buttons for that Mode.

i. When Learning, do not release the button being

Learned until the red indicator has blinked off for

half a second.

j. Avoid learning your original remote Volume/Mute

buttons unless you are sure these operate the same

device e.g. some original DVD remotes include TV

Volume/Mute button control and can be two

different types of code.

k. Avoid learning your original remote VCR transport

buttons unless you are sure these operate the same

device e.g. some original TV remotes include VCR

button control and can be two different types of

code.

l. If learning the first or second buttons for a Mode

results in continuous errors then try the following:

i. End the Learn session by pressing the SETUP key.

ii. Clear out the learned commands for that Mode.

iii. Check the IR transmitters are correctly aligned

between the two remotes (use the IR Transmitter

Finder facility).

iv. Adjust the distance between the two remotes to be

closer (e.g. half an inch) or a further away (e.g. 2

inches) from each other.

v. Try learning the original remote for that Mode again.

If problems reoccur with the same button check the

original remote button being learned – does it transmit?

Does it operate the target device? Try learning that

button under a different clear Mode. If it learns okay

then it is likely to be a different code type from the

others and cannot be learned under the same Mode.

Tips On Learning, cont.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips SRU 3005 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips SRU 3005

Philips SRU 3005 User Manual - German - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips SRU 3005 Manual

Product: