400873
16
Zoom out
Zoom in
Previous page
1/100
Next page
Problem Possible cause Solution
The appliance
continues to give
off an unpleasant
smell after I used it
a few times.
You put too much
food in the jar or
you let the appliance
blend too long.
Process smaller quantities and do not let the
appliance blend for more than 30 seconds at a
time.
The appliance
makes a lot of
noise, produces an
unpleasant smell,
feels hot to the
touch, emits
smoke, etc.
There is too much
food in the jar.
Switch off the appliance and process a smaller
quantity.
You let the appliance
operate too long
without interruption.
Do not let the appliance blend for more than 30
seconds at a time.
The lid of the jar
leaks.
You have not
assembled the lid on
the jar properly.
Assemble the lid on the jar properly. See chapter
‘Using the appliance’.
There is too much
food in the jar.
Switch off the appliance and process a smaller
quantity.
There are white
spots on the lling
opening and/or on
the jar, sieve and
lid.
Scale has built up on
these parts.
This is normal. Remove the scale periodically. See
chapter ‘Cleaning and maintenance’, section
‘Descaling’.
The appliance
produces a lot of
noise while it is
blending.
The sieve is not
attached to the lid of
the jar.
Make sure that the sieve is attached to the lid of
the jar.
The water in the
water tank has an
unusual colour
when you pour it
out of the water
tank or when it
enters the jar
during steaming,
or the water in
the water tank has
an unpleasant
smell.
Food particles have
entered the water
tank during use.
Clean the water tank according to the instructions
in chapter ‘Cleaning and maintenance, section
‘Descaling the water tank’. Use the appliance strictly
according to the instructions. Make sure you do not
overll the water tank with water (max 200ml) and
that you do not overll the jar with food (do not ll
the jar beyond the top edge of the green blade
unit). Do not steam the same ingredients for more
than 20 minutes and do not put water for steaming
directly in the jar. Also make sure that the valve is
xed in the lid.
16
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips scf 870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips scf 870 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info