400193
11
Zoom out
Zoom in
Previous page
1/108
Next page
Do not use abrasive or antibacterial cleaning agents. Excessive concentrations of cleaning agents
may eventually cause the plastic to crack. Throw away the cups and lids if cracking occurs.
2 Sterilise the cups and lids right before you use them again.
The cups and lids are suitable for all methods of sterilisation.

- Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an ofcial collection point for recycling. By doing this, you help to preserve the
environment (Fig. 15).

If you need service or information or if you have a problem, please visit the Philips AVENT website
at www.philips.com/AVENT or contact the Philips Consumer Care Centre in your country
(you nd its phone number in the worldwide guarantee leaet). If there is no Consumer Care
Centre in your country, go to your local Philips dealer.

Problem Possible cause Solution
The appliance does
not work
The appliance is equipped
with a safety lock. If the
blender beaker or wet mill
beaker has not been
assembled properly onto the
motor unit, the appliance does
not work.
Press the on/off button to make sure that
the appliance is switched off. Then check
whether the beaker has been assembled
properly (see chapter ‘Using the
appliance’).
The blade unit or
motor unit is
blocked.
There is too much food in the
beaker.
Switch off the appliance and process a
smaller quantity.
The motor unit
gives off an
unpleasant smell
during the rst few
times of use.
This is normal. If the appliance continues to give off this
smell after you have used it a few times,
check whether the processing
quantity and processing time are correct.
The appliance
makes a lot of noise,
smells, feels hot to
the touch, emits
smoke, etc.
There is too much food in the
beaker.
Switch off the appliance and process a
smaller quantity.
You let the appliance operate
too long without interruption.
Do not operate the blender for more
than 1 minute at a time. Do not operate
the wet mill for more than 30 seconds at
a time.
The lid of the
blender beaker
leaks.
You have not placed the lid
properly.
Make sure the lid of the blender beaker
has been properly placed.
 11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips scf 860 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips scf 860 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info