400193

Philips scf 860 Manual

9
Zoom out
Zoom in
Previous page
1/108
Next page
Do not operate the blender for more than 1 minute at a time.
If you have not nished blending after 1 minute, switch off the appliance and wait 1 minute before
you continue. If the appliance becomes hot, let it cool down before you continue.
Never reach into the blender beaker with your ngers or an object (e.g. a spatula) while the
blender operates.
Do not touch the sharp blades. If the blades get stuck, unplug the appliance and remove the
ingredients that block the blades with a spatula.

- To avoid spillage, never ll the blender beaker above the maximum level indication (0.4 litres).
- You can pour liquid ingredients (e.g. oil) into the blender beaker through the opening in the lid
while the appliance operates (Fig. 5).
- Cut solid ingredients into smaller pieces (1-2cm) before you put them in the blender beaker. Do
not process a large quantity of solid ingredients at the same time. Process these ingredients in a
series of small batches instead.

The wet mill is intended for:
- Processing small amounts of food, e.g. 1 or 2 portions of baby food.
- Chopping moist ingredients, such as meat, onions etc (Fig. 6).
The wet mill is not suitable for chopping dry ingredients such as coffee beans and dried beans.
Do not use the wet mill to mix liquids or to crush ice cubes. Use the blender to process these
ingredients.
Do not touch the sharp blades. If the blades get stuck, switch off the appliance and disassemble
the wet mill beaker. Use a spatula to remove the ingredients that block the blades.
1 Cut the ingredients into smaller pieces (approx. 1-2cm) and put them in the wet mill
beaker. (Fig. 7)
Do not ll the wet mill beaker beyond the MAX indication.
See the table below for the recommended quantities.
Ingredients wet mill Quantities
pre-soaked seeds and grains (e.g. lotus seeds, rice) 20-50g
onions 20-50g
2 Turn the assembled wet mill upside down and place it on the motor unit (1). Turn the wet
mill clockwise to fasten it (2) (‘click’) (Fig. 8).
3 Put the plug in the wall socket and press the on/off button. (Fig. 9)
Hold the motor unit rmly with both hands when the appliance operates.
Do not operate the wet mill for more than 30 seconds at a time.

- If the ingredients stick to the wall of the wet mill beaker, switch off the appliance and
disassemble the wet mill beaker. Use a spatula to loosen the ingredients from the wall (Fig. 10).
- If the appliance shakes because the food is not evenly distributed, switch off the appliance and
disassemble the wet mill. Distribute the ingredients evenly in the wet mill beaker, reassemble the
wet mill and screw it onto the motor unit. Then switch on the appliance again.
 9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips scf 860 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips scf 860 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info