9
22 Important information
22 Technical specifications
22 Maintenance
23 Environmental information
23 Factory initialization mode
24 Compliance information
24 Radio Interference
25 FCC RF Radiation Exposure Statement
25 Assistance
26 Warranty
Contents
EN
Preparing your baby monitor
Baby unit
The baby unit can be operated by power supply or batteries.
When batteries are inserted, you will have an automatic back-up
in case of power supply failure.
Cord operated use
1 Connect the power adapter cord (A-14) to the power supply
jack (DC 9V / 300mA - A-13) of the baby unit.
2 Connect the AC power adapter (A-14) to a wall outlet.
➜ The baby unit is now ready for cord operated use!
Battery operated use
1 Open the battery compartment by turning the cover (A-12)
to the left (C OPEN), using the palm of your hand.
Take the cover off.
2 Insert four 1.5V AA batteries, noting the + and –
configuration inside the battery compartment (batteries are
not supplied; we recommend Philips Alkaline batteries).