368395
14
Zoom out
Zoom in
Previous page
1/152
Next page
Question Answer
The baby unit may be out of range of the parent unit or there may be
too many walls and/or ceilings between the two units. Try a different
location or reduce the distance between the two units.
The non-rechargeable batteries of the baby unit or the rechargeable
battery pack of the parent unit may be low. In that case, replace the
batteries of the baby unit or recharge the battery pack of the parent
unit.
Why does the parent
unit pick up signals
from another baby
monitor?
The baby monitor operates on the same channel as another baby
monitor in the neighbourhood. Set both units to a different channel with
the channel selector.
Why doesn’t the baby
monitor manage the
specied range of 200
metres/600 feet?
The specied range of 200 metres/600 feet is only valid in open air.
Inside the house, the range is limited by the number and type of walls
and/or ceilings between the two units. Change the position of one or
both units to optimise the range.
What happens when
there is a mains
failure?
If you use the baby unit without non-rechargeable batteries, the
connection between the parent unit and the baby unit will be lost when
there is a mains failure. If there are batteries in the baby unit but the
rechargeable battery pack of the parent unit is empty, the connection
will also be lost. If there are non-reachargeable batteries in the baby unit
and the battery pack of the parent unit is charged, the connection will
not be lost.
Why does the
rechargeable battery
pack of the parent unit
not recharge?
The rechargeable battery pack has reached the end of its life. Replace
the battery pack of the parent unit.
The operating time of
the parent unit is
supposed to be at
least 10 hours. Why is
the operating time of
my parent unit
shorter?
When the rechargeable battery pack of the parent unit has been
charged for the rst time, the operating time is less than 10 hours. The
rechargeable battery pack only reaches its full capacity after you have
charged and discharged it at least three times.
The volume of the parent unit may be set too high, which causes the
parent unit to consume a lot of energy. Decrease the volume of the
parent unit.
The microphone sensitivity level of the baby unit may be set too high,
which causes the parent unit to consume a lot of energy. Decrease the
microphone sensitivity level on the baby unit.
Why does the
charging light on the
parent unit
charger light up red
continuously even
when the battery pack
is fully charged?
The charging light always lights up red as soon as the parent unit is
placed in the plugged-in charger. It gradually dims when the batteries are
fully charged but remains on to indicate that the charger is connected to
the mains.
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips scd481 00 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips scd481 00 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info