Manual Philips scd481 00 (page 9 of 152) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

368395

Zoom out

Zoom in

1/152

5 Place the parent unit within the operating range of the baby unit. Make sure it is at least 1

metre/3 feet away from the baby unit. For more information on the operating range, see

section ‘Operating range’ below (Fig. 12).



The operating range of the baby monitor is 200 metres/600 feet in open air. Depending on the

surroundings and other disturbing factors, this range may be smaller.

Dry materials Material thickness Loss of range

Wood, plaster, plaster cardboard, glass

(without metal, wires or lead)

<30cm/12in 0-10%

Brick, plywood <30cm/12in 5-35%

Reinforced concrete <30cm/12in 30-100%

Metal grilles or bars <1cm/0.4in 90-100%

Metal or aluminium sheets <1cm/0.4in 100%

For wet and moist materials, the range loss may be up to 100%.





The parent unit has a LINK light that continuously informs you of the status of the connection

between the baby unit and the parent unit. You can set an alert on the parent unit to notify you that

the connection has been lost. The parent unit beeps and the LINK light ashes red when

the connection has been lost.



1 Slide the lid of the compartment for the rechargeable pack downwards to remove it (Fig. 5).

2 Remove the rechargeable battery pack from the compartment (1) and remove the plug from

the socket (2) (Fig. 13).

3 Set the link alert switch in the compartment to the ‘on’ position (Fig. 14).

- To switch off the alert, set the link alert switch to the ‘off’ position (Fig. 15).

4 Slide the lid back onto the parent unit.



With the microphone sensitivity control on the baby unit, you can set the sound that is picked up by

the baby unit to the desired level: low, mid or high. When the microphone sensitivity is set to ‘high’,

the baby unit picks up all sounds.

Note: The sensitivity of the baby unit can only be changed when there is a connection between the baby

unit and the parent unit.

1 Set the microphone sensitivity control to the desired level (Fig. 16).

, The power-on light on the baby unit turns yellow when a sound is transmitted (Fig. 17).

Note: You can use your own voice as a sound reference.

Note: When the microphone sensitivity of the baby unit is set to ‘high’, it picks up more sounds and

therefore transmits more often. As a result, the units consume more power.

 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips scd481 00 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips scd481 00 Manual

Product: