368271
9
Zoom out
Zoom in
Previous page
1/188
Next page
4 Press the TONE/PULSE selector to select tone dialling or pulse dialling. (Fig. 9)
Note:Always select tone dialling unless your telephone works with pulse dialling or if your telephone
company only supports pulse dialling.
Tip:Most older dial telephones use pulse dialling, while most modern keypad telephones use tone dialling.
Programming for dial-up mode with Quick Install
When you switch on the baby unit, M1 starts to blink on the display. This shows that the baby unit is
in Quick Install mode. This mode enables you to set up the baby unit for dial-up use quickly without
any preprogramming.
1 Enter a telephone number and press the OK button to conrm. (Fig. 10)
Note:Press the Ö button to include a pause in the telephone number. The display shows the pause as P.
The telephone number entered is stored in M1.
PIN and ---- start to blink on the display.
2 Enter a 4-digit pin code and press the OK button to conrm.
Ö and 10 (default sensitivity time) start to blink on the display.
3 Set the sensitivity time and press the OK button to conrm.
The sensitivity time is the time after which the baby unit calls the selected telephone number
when it detects a sound.
You can set a sensitivity time between 10 and 360 seconds. The default sensitivity time is 10
seconds.
Note:If you do not press another button for 5 seconds, the baby unit enters the regular baby monitor
mode.
Note:To cancel all settings and leave the Quick Install mode, press the RESET button for more than 5
seconds.
Programming for dial-up mode with the PRG button
1 Press the PRG (program) button on the keypad to enter the programming mode. (Fig. 11)
Use the keypad buttons to enter or change settings.
Press the OK button on the keypad to conrm settings.
Use the C (clear) button on the keypad to clear the last entered digit.
Note:When you do not press a key for 5 seconds, the baby unit leaves the programming mode.
2 Press the M (memory) button once or several times to nd an empty memory location.
(Fig. 12)
The memory icon (M1-M5) blinks when a memory location is free.
Use the numeric keypad to enter the desired telephone number. The number may consist of a
maximum of 40 digits.
The memory icon stops blinking.
The display briey shows the telephone number (11 digits only).
Then the number disappears from the display while the memory icon remains highlighted.
The number is stored in the memory of the baby unit.
Repeat the above steps to store other telephone numbers.
Note:Press the Ö button to include a pause in the telephone number. The display shows the pause as P.
3 Select the language on the display.
Press the OK button and the number of the language you want the baby unit to use.
Note:The languages available are English (1), French (2), German (3), Spanish (3) or Dutch (5). English is
the default language.
Press the OK button to conrm your choice.
,
,
,
-
-
-
-
-
,
-
,
,
,
-
-
-
ENGLISH 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips scd469 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips scd469 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info