Manual Philips scd 480 (page 9 of 120) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

368306

Zoom out

Zoom in

1/120

Dry materials Material thickness Loss of range

Reinforced concrete <30cm/12in 30-100%

Metal grilles or bars <1cm/0.4in 90-100%

Metal or aluminium sheets <1cm/0.4in 100%

For wet and moist materials, the range loss may be up to 100%.

Features



The parent unit has a link light that continuously advises you of the status of the connection

between the baby and the parent units. You can set an alert on the parent unit to notify you if the

link is lost. The alert will sound an audible beep and the link light will ash red when a connection is

lost.

To activate the alert on the parent unit:

1 Turn the locking knob a quarter turn (1) and slide the battery cover downwards to remove it

(2) (Fig. 4).

2 Set the link alarm switch in the battery compartment to the ‘on’ position.

3 Replace the battery compartment lid.

To switch off the alert, set the link alert switch to the ‘off’ position.

Adjustable sound sensitivity

With the microphone sensitivity control on the baby unit, you can set the sound that is picked up by

the baby unit to the desired level: low, mid or high. When the microphone sensitivity is set to ‘high’,

the baby unit picks up all sounds.

Note: The sensitivity of the baby unit can only be changed when there is a connection between the baby

unit and the parent unit.

1 Use the microphone sensitivity control to set the microphone sensitivity of the baby unit to

the desired level. You can use your own voice as a sound reference (Fig. 10).

The power-on light on the baby unit turns yellow when a sound is transmitted.

Note: Whilst operating on batteries, if the sensitivity is set to a high level, the parent unit will consume

more power.

Adjustable loudspeaker volume

You can change the volume on the parent unit, so you can adjust to suit your surroundings.

1 Turn the volume dial on the right side of the parent unit until the desired loudspeaker

volume for the parent unit has been reached.

Note: Whilst operating on batteries, if the volume is set to a high level, the parent unit will consume more

power.

Channel selector

Always make sure that the channel selectors inside the battery compartments of both units are set

to the same channel. With these channel selectors, you can select sixteen different channel positions.

If you experience interference from other baby monitors, radio devices etc., select a different

channel..

1 Open the battery compartment lids of both units.

ENGLISH 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips scd 480 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips scd 480 Manual

Product: