Manual Philips scd 480 (page 8 of 120) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

368306

Zoom out

Zoom in

1/120

Mains operation

1 Put the appliance plug in the parent unit and put the adapter into a wall socket.

The power-on light goes on.

Operation on non-rechargeable batteries

The parent unit runs on four 1.5V R6 AA batteries (not included). We strongly advise you to use

Philips LR6 PowerLife batteries.

Do not use rechargeable batteries, as the parent unit does not have a charging function.

Unplug the parent unit and make sure your hands and the unit are dry when you insert the non-

rechargeable batteries.

1 Turn the locking knob a quarter turn (1) and slide the battery cover downwards to remove it

(2) (Fig. 4).

2 Insert four non-rechargeable batteries.

Make sure the + and - poles of the batteries point in the right direction.

3 Replace the battery compartment lid.

Note: When the batteries are low, the power light on the parent unit ashes red.

Note: When the batteries are completely empty, the parent unit automatically switches off and loses

contact with the baby unit.

Using the appliance

1 Place the two units in the same room to test the connection (Fig. 5).

Make sure the baby unit is at least 1 metre/3 feet away from the parent unit.

2 Press the on/off button to switch on the baby unit (Fig. 6).

The power-on light lights up green continuously.

3 Turn the volume control to switch on the parent unit and to set the volume to the level you

prefer. (Fig. 7)

The power-on light lights up green continuously.

, When a connection has been established between the units, the connection light on the

parent unit lights up green constantly.

Note: It takes about 30 seconds before a connection is established.

Note: If a connection cannot be established, the connection light on the parent unit ashes red.

4 Place the baby unit at least 1 metre/3 feet away from your baby (Fig. 8).

5 Place the parent unit within the operating range of the baby unit. Make sure it is at least 1

metre/3 feet away from the baby unit. For more information on the operating range, see

section ‘Operating range’ below (Fig. 9).

Operating range

The operating range of the baby monitor is 200 metres/600 feet in open air. Depending on the

surroundings and other disturbing factors, this range may be smaller.

Dry materials Material thickness Loss of range

Wood, plaster, plaster cardboard, glass

(without metal, wires or lead)

<30cm/12in 0-10%

Brick, plywood <30cm/12in 5-35%

ENGLISH8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips scd 480 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips scd 480 Manual

Product: