527154
21
Zoom out
Zoom in
Previous page
1/134
Next page
Troubleshooting
This chapter summarises the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the
information below, visit www.philips.com/support for a list of frequently
asked questions or contact the Consumer Care Centre in your country.
Problem Possible cause Solution
The adapter/
appliance becomes
warm during
charging.
This is normal. No action required.
I have switched on
the appliance but I
cannot increase or
decrease the light
intensity.
The appliance
has to be reset.
To reset the appliance, switch off the appliance and
then switch it on again. If you still cannot adjust the light
intensity, contact the Consumer Care Centre in your country,
your Philips dealer or a Philips service centre.
The ‘ready to ash’
light does not
work when I place
the appliance on
the skin.
You have not
properly placed
the appliance on
the skin.
Place the appliance at a 90° angle onto the skin in such a way
that all 4 sides of the integrated safety system touch the skin.
Then check if the ‘ready to ash’ light lights up continuously
and press the ash button.
If this does not work, place the appliance on a part of
your body where it is easy to establish full skin contact, for
example on your lower arm.Then check if the ‘ready to
ash’ light works. If the ‘ready to ash’ light still does not start
ashing when you place the appliance on the skin, contact the
Consumer Care Centre in your country, your Philips dealer
or a Philips service centre.
The ‘ready to
ash’ light does
not work when
I place the body
attachment on
my skin, but the
cooling fan works.
The overheat
protection has
been activated.
When the overheat protection has been activated, the fan
still works. Do not switch off the appliance and let it cool
down for approx. 15 minutes before you continue to use it.
After 5 minutes the appliance switches off automatically. Then
let it cool down for 10 more minutes. If the ‘ready to ash’
light still does not work when you place the appliance on
the skin, contact the Consumer Care Centre in your country,
your Philips dealer or a Philips service centre.
The ‘ready to
ash’ light lights up
continuously, but
the appliance does
not produce a
ash when I press
the ash button.
The appliance
needs to be reset.
To reset the appliance, switch off the appliance and switch it
on again. If the ‘ready to ash’ light lights up continuously, but
the appliance still does not produce a ash when you press
the ash button, contact the Consumer Care Centre in your
country, your Philips dealer or a Philips service centre.
Intensity light
1 continues to
blink and I cannot
change the setting.
The body
attachment is not
placed on the
appliance properly.
Properly place the body attachment on the appliance.
ENGLISH 21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips SC1992 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips SC1992 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips SC1992

Philips SC1992 Quick start guide - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info