48665
58
Zoom out
Zoom in
Previous page
1/70
Next page
User Guide
58
Troubleshooting
Customising Problems
Buttons are not sending the correct commands
Make sure you have defined the correct brands for your devices. (p. 20)
Make sure you have defined the correct code set for your devices. (p. 21)
Make sure you should calibrate your screen. (p. 35)
Check whether the button of the device is learned properly. (p. 23)
Check whether the macro recorded properly. (p. 38)
Macros do not work
Make sure ProntoPro NG’s sending eye is pointed towards the device the
entire time the macro is being executed.
The sending eye is located at the top of ProntoPro NG.
Insert delays to allow devices to start up properly.
Check for inactive buttons in your macro.
Check if you did not reprogram the buttons. Macros do not store commands,
they store buttons. If you reprogram a button, the macro executes the new
command assigned to the button.
ProntoPro NG will not learn commands
Make sure your ProntoPro NG and the remote control are positioned correctly.
When the sending eye of your existing remote control is not pointed
towards the learning eye of the ProntoPro NG, ProntoPro NG might not
receive the signals properly. Align the remote controls as correctly as
possible.
When the distance between your existing remote control and the
ProntoPro NG is too short or too long, ProntoPro NG might not receive the
signals properly. Try out several distances between 5 and 20 centimetres
(2 and 8 inches) to learn the commands.
Avoid programming ProntoPro NG under bright fluorescent light, in sunlight or
in a dark room: it might affect the infrared signals.
Make sure the battery pack in the ProntoPro NG is not empty.
Press and hold the key on the other remote control for more than one second.
The configuration file is corrupted
When the configuration file is corrupted, you can use ProntoProEdit NG to
download a new configuration file. Taken into account that all your customised
commands, devices and macros will be lost and you will have to reprogram your
ProntoPro NG. Therefore it is recommended to save the configuration by uploading
it to the PC with ProntoProEdit NG.
SBCRU980_ML_UK1004.qxd 19-10-2004 16:08 Pagina 58
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips SBCRU980 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips SBCRU980 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips SBCRU980

Philips SBCRU980 User Manual - German - 70 pages

Philips SBCRU980 User Manual - Dutch - 70 pages

Philips SBCRU980 User Manual - French - 70 pages

Philips SBCRU980 User Manual - Spanish - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info