48665
57
Zoom out
Zoom in
Previous page
1/70
Next page
User Guide
57
EN
General Problems
ProntoPro NG shuts off automatically
This is a timeout feature of ProntoPro NG to save power. You can change the time
ProntoPro NG stays active in the Settings Tool.
See ‘Setting the Timeout of the LCD Screen’ on page 33 for more information.
The touch screen buttons on the ProntoPro NG do not respond
properly
If the touch screen buttons on the ProntoPro NG do not respond properly, calibrate
the touch screen.
See ‘Calibrating the Touch Screen’ on page 35 for more information.
Devices do not respond to commands from ProntoPro NG
Make sure the ProntoPro NG’s sending eye is pointed towards the device you
are operating.
Check if the Low Battery icon has appeared on the screen. If so, place the
ProntoPro NG in the docking station and recharge the battery pack.
Check if your device understands Philips-Marantz RC codes. Normally you can
find this in the documentation of your device.
Make sure you have defined the correct brands for your devices. (p. 20)
Make sure you have defined the correct code set for your devices. (p. 21)
Check if the button you are trying to use is assigned properly via Brand Tool or
via Learn Tool. (p. 23)
Check if your device is in RF mode. Switch your device back to IR mode. (p. 52)
If you have set up your ProntoPro NG to operate devices with RF signals:
Check in the RF IR Tool if the devices you want to operate are set up
properly. (p. 51)
Check if the Extender ID and the Channel ID on your ProntoPro NG match
the Extender ID and the Channel ID on the RF Extender.
Make sure the RF Extender is placed near the devices you want to use
with RF signals.
Make sure that the distance between the RF Extender and the
ProntoPro NG is at least 1 metre.
Make sure that the RF Extender’s sending eye is pointed towards the
device.
Change the Channel if you notice interferences from other RF channels.
If you want to use RF signals for devices on different locations, you need more
than one RF Extender. See the User Guide of the RF Extender for more
information.
Troubleshooting
SBCRU980_ML_UK1004.qxd 19-10-2004 16:08 Pagina 57
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips SBCRU980 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips SBCRU980 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips SBCRU980

Philips SBCRU980 User Manual - German - 70 pages

Philips SBCRU980 User Manual - Dutch - 70 pages

Philips SBCRU980 User Manual - French - 70 pages

Philips SBCRU980 User Manual - Spanish - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info