48591
9
Zoom out
Zoom in
Previous page
1/146
Next page
Copy key functions
It is possible to copy key functions from keys in one device mode (e.g.TV mode) to keys
in another device mode (e.g. DVD mode) so you can operate different devices without
changing mode. For example: you can put the TV in Standby while being in DVD mode.
1 Press and hold SETUP until SETUP lights up in the display.
DEV (first line)
ADD (second line)
2 Use the Device Selection keys to select KEY.
KEY (first line)
3 Use SMART CONTROLS to select COPY.
COPY (second line)
4 Confirm with SEND.
FROM (first line)
5 Use SMART CONTROLS to select the device you wish to copy key functions
from.
TV (for example - second line)
6 Confirm with SEND.
7 Press a key to copy from.
(The keys below the part-line, Standby key, and the SMART CONTROLS can be
copied.)
Note: Select a Smart Control with the SMART CONTROLS and press SEND to copy.
TO (first line)
8 Use SMART CONTROLS to select the device you want to copy the key function
to.
DVD (for example - second line)
9 Confirm with SEND.
10 Press the key you want the function to be copied to.
STORED (second line)
Note: Select a Smart Control with the SMART CONTROLS and press SEND to copy.
Macro keys
With a macro key you can operate a series of functions by pressing one single key.
E.g. switching on all devices installed with one key.
1 Press and hold SETUP until SETUP lights up in the display.
DEV (first line)
ADD (second line)
2 Use the Device Selection keys to select KEY.
KEY (first line)
3 Use SMART CONTROLS to select MACRO.
MACRO (second line)
4 Confirm with SEND.
5 Use SMART CONTROLS to select the device on which you want to install the
Macro.
TV (for example - second line)
6 Confirm with SEND.
7 In TV mode, press a key where the macro should be stored.
MACRO (first line)
START (second line)
Notes: - Press the keys in the sequence that you want your equipment to respond.
- The keys below the part-line, STANDBY key, and the SMART CONTROLS can be
macro keys.
- Select a smart control with the SMART CONTROLS and press SEND to select as
macro key.
- After every key press SMART ADDED is displayed.
8 Start pressing the keys you want to store in the macro. If necessary by navigating
trough different device modes and smart controls.
Note: Press SHIFT + SEND to store a Smart Control into the macro.
9 Press SEND.
STORED (second line)
ENGLISH
9
XP SBC RU 885 27-09-2002 16:39 Pagina 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips SBCRU885 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips SBCRU885 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info