48591
7
Zoom out
Zoom in
Previous page
1/146
Next page
Autosearch
If you cannot find the code of the device Philips' patented Autosearch tests all the codes
one after another and finds the right one for you! Make sure your device is switched on.
You will know the correct code has been found when the equipment switches off.
1 Switch on the device you wish to add.
If you wish to add a VCR make sure a tape is inserted and playing. As soon as the
correct code has been found the tape will stop playing.
2 Press and hold SETUP until SETUP lights up in the display.
DEV (first line)
ADD (second line)
3 Use the SMART CONTROLS to select SEARCH.
SEARCH (second line)
4 Use the SMART CONTROLS to select the device for which you wish to search
the code for.
TV ( for example second line)
5 Confirm with SEND.
Each time a code is transmitted it is displayed on the LCD.There is a
1.5 second period between each transmission.When the right code is found,
the TV switches off.
6 Immediately press SEND to stop the search.
The LCD displays the selected equipment and its code.
If you missed the correct code because the search went too far, switch the TV back on,
then press A SMART CONTROLS to send the previous code again. Keep pressing
A SMART CONTROLS down repeatedly until the equipment switches off again.
7 When you've found the correct code, press SEND to lock the code in the
SBC RU885’s memory.
If none of the codes works or if you are still missing certain functions of your original
remote control, try our solution in chapter ‘Learn codes from original remote control’
hereafter, or call our help-line.
Note that code!
Make a note of the correct code inside the battery case and in the back of this booklet;
it will save you time if you ever need to set up again. If you have forgotten to note the
code you can still 'read out' the code from the SBC RU885.
For this, see chapter ‘Read device code’ hereafter.
Read device code
1 Press and hold SETUP until SETUP lights up in the display.
DEV (first line)
ADD (second line)
2 Use SMART CONTROLS to select CODE.
CODE (second line)
3 Confirm with SEND.
4 Use the SMART CONTROLS to select the device of which you wish to read the
code.
TV (for example - second line)
5 Confirm with SEND.
The code is displayed on the screen.
6 Confirm with SEND.
STORED (second line)
Set RF (Radio Frequency) or IR (Infra-Red) transmission
The RU885 is able to transmit both RF (Radio Frequency) and IR (Infra-Red) signals.
When the RF functionality of the RU885 is enabled it will send RF signals that go through
walls or, if your equipment is located in a cabinet, through the cabinet door.To operate
your equipment via RF transmission you will need the optional RF receiver SBC LI805.
When receiving a signal from the RU885 the receiver will convert the RF signal to an
appropriate IR signal and sends it to the equipment you wish to operate.The RU885 is
standard set to IR transmission. For equipment that cannot be operated via IR
transmission:
ENGLISH
7
XP SBC RU 885 27-09-2002 16:39 Pagina 7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips SBCRU885 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips SBCRU885 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info