450367

Philips RQ 1160 Manual

11
Zoom out
Zoom in
Previous page
1/232
Next page
Problem Possible cause Solution
Long hairs obstruct the shaving heads. Clean the shaving heads by following the steps of the
extra-thorough cleaning method (see chapter
‘Cleaning and maintenance’).
The Jet Clean System has not cleaned the shaver
properly, because the cleaning uid in the cleaning
chamber is soiled or the cleaning uid level is too
low.
Clean the shaver thoroughly before you continue
shaving. If necessary, clean and rell the cleaning
chamber (see chapter ‘Cleaning and maintenance’).
The shaver does not work
when I press the on/off button.
The rechargeable battery is empty. Recharge the battery (see chapter ‘Charging’).
The travel lock is activated. Press the on/off button for 3 seconds to deactivate
the travel lock.
The shaving head holder is soiled or damaged to
such an extent that the motor cannot run.
Clean the shaving head holder or replace it (see
chapters ‘Cleaning and maintenance’ and
‘Replacement’).
The temperature of the shaver is too high. In this
case, the shaver does not work.
Let the shaver cool down. As soon as the
temperature of the shaver has dropped sufciently,
you can switch on the shaver again.
The shaver is not entirely clean
after I clean it in the Jet Clean
System.
The cleaning uid in the cleaning chamber is soiled. Empty and rinse the cleaning chamber.
The cleaning uid level is too low. If the uid
volume in the cleaning chamber drops below the
minimum level during the cleaning program, the
program aborts.The cleaning light and the ‘cleaning
chamber empty’ symbol ash at intervals and the
holder returns to its starting position.
Rell the cleaning chamber with cleaning uid to a
level between the two lines (see chapter ‘Cleaning
and maintenance’).
You have used another cleaning uid than the
original Philips cleaning uid.
Only use HQ200 Philips Cleaning Fluid.
The Jet Clean System does not
work when I press the on/off
button.
The Jet Clean System is not connected to the
mains.
Put the small plug in the Jet Clean System and put
the adapter in the wall socket.
There is no electrical connection between the Jet
Clean System and the shaver.
Press the shaver tightly into the holder to lock it into
place.
The shaver is not fully charged
after I charge it in the charger/
Jet Clean System.
You have not placed the shaver in the charger/Jet
Clean System properly.
Make sure you press the shaver until it locks into
place.
 11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips RQ 1160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips RQ 1160 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info