751536
17
Zoom out
Zoom in
Previous page
1/154
Next page
16 Philips · NeoPix Easy 2+
Problems Solutions
The projector cannot be turned on. Disconnect and reconnect the power cable, and try to
turn the projector on again.
The projector cannot be turned off. Press and hold longer than ten seconds. If this does
not work, disconnect the power cable.
No image from the external HDMI
device.
Disconnect the HDMI cable or switch off the HDMI
device.
Wait three seconds.
Reconnect the HDMI cable or switch on the HDMI
device again.
No sound from the external
connected device.
Check the cables to the external device.
Check that the sound is activated on the external
device.
Only the original cables from the device manufacturer
may function.
No sound from external HDMI output
device.
On the HDMI output device, set the audio setting to
Multichannel (Raw data) & Stereo (PCM).
No sound when you connect your
computer via HDMI cable.
Check that the sound is activated on the computer.
Only the home menu appears and
not the image from the external
device.
Check if the cables are connected to the correct
sockets.
Check that the external device is turned on.
Check if the video output of the external device is
turned on.
Only the home menu appears and
not the image from the connected
computer.
Check that the VGA output of the computer is turned
on.
Check if the resolution of the computer is set to
1920*1080 (for VGA connection) or 1080P (for HDMI
connection).
The projector turns itself off. When the projector is running for a long period of time,
the surface becomes hot.
Check that the power cable is connected correctly.
The projector cannot read the USB
stick.
The projector does not support the exFAT file system.
Format the USB stick in FAT format, then use it.
The projector does not react to
remote control commands.
Check the batteries of the remote control.
The temperature of the projector’s
surface is warm.
For this projector it is normal to generate moderate
heat during operation.
What to do if the projector does not
work when connecting to a notebook
PC?
Check that the HDMI cable is plugged in correctly.
Make sure that the notebook PC has been switched to
projector display.
Troubleshooting
Power cycling
If a problem occurs that cannot be corrected
with the instructions in this user manual, follow
the steps given here.
1 Turn the projector off by pressing .
2 Wait at least ten seconds.
3 Turn the projector on by pressing once.
4 If the problem persists, please contact our
technical service centre or your dealer.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips NPX442 - NeoPix Easy 2 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips NPX442 - NeoPix Easy 2 plus in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 38,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info