751536

Philips NPX442 - NeoPix Easy 2 plus Manual

15
Zoom out
Zoom in
Previous page
1/154
Next page
14 Philips · NeoPix Easy 2+
6 Change settings
This section helps you change the settings
of the projector.
Picture settings
1 Press .
2 Select SETUP, and then press OK to access
the setting options.
3 Select a picture option, and then press /
to change:
• Picture Mode: Select pre-defined color
settings for picture or video display.
Select User to customize the following
settings:
• Contrast: Set color contrast.
• Brightness: Set color brightness.
• Color: Set color saturation.
• Sharpness: Set image sharpness.
• Keystone Correction: Correct keystone
or distorted images to be rectangular or
square.
• Digital Zoom: Enlarge or reduce the size
of the image projected.
• Color Temperature: Set different color
temperature.
• Aspect Ratio: Set a screen ratio.
• Noise Reduction: Set a noise reduction
level.
Sound settings
1 Press .
2 Select SETUP, and then press OK to access
the setting options.
3 Select a sound option, and then press /
to change:
• Sound Mode: Select pre-defined sound
settings for your video or music. Select
User to customize the following settings:
• Treble: Set a treble level.
• Bass: Set a bass level.
• Balance: Adjust balance levels to
experience the original sound of your
movie and music.
• Auto Volume: Set auto volume on to
reduce sudden changes in volume.
• Surround Sound: Turn surround on or
off.
Language settings
1 Press .
2 Select SETUP, and then press OK to access
the setting options.
3 Select OSD Language, and then press /
on the remote control to select your desired
language for on-screen menu.
Restore default settings
1 Press .
2 Select SETUP, and then press OK to access
the setting options.
3 Select Restore Factory Default, and then
press OK�
4 Follow the on-screen instructions to start or
cancel resetting.
Rotate/flip projection
screen
1 Press .
2 Select SETUP, and then press OK to access
the setting options.
3 Select Panel Flip Rotate, and then press
/ to rotate or flip the projection screen.
Set sleep timer
Set a period of time after which the projector
turns off automatically.
1 Press .
2 Select SETUP, and then press OK to access
the setting options.
3 Select Sleep Timer, and then press / to
select a period of time (in minute).
Set auto sleep
Set a time length so that the projector turns off
automatically after a period of time of inactivity.
1 Press .
2 Select SETUP, and then press OK to access
the setting options.
3 Select Auto Sleep, and then press / to
select a period of time (in hour).
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips NPX442 - NeoPix Easy 2 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips NPX442 - NeoPix Easy 2 plus in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 38,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info