521762

Philips Magic Manual

13
Zoom out
Zoom in
Previous page
1/36
Next page
13
Connecting to ISDN
Your fax machine is not an ISDN fax (group 4), but an analogue fax
machine (group 3). Therefore it cannot be used directly on an ISDN
connection. You will need an (analogue) adapter or an ISDN connection
for analogue devices. For further information please refer to your ISDN
instructions.
Connecting to a private branch exchange
(PABX)
Private branch exchange systems are very common in large
companies. ISDN connections are private branch exchanges and
are used very often in private households. To get a connection
from a private branch exchange to the public network you have
to dial a key to obtain the outside line.
Please note: An additional telephone which is connected to a normal
telephone line together with your fax machine must not be mixed
up with a private branch exchange.
If you wish to use your fax machine on a PABX you have to change some
settings in function 15.
Tone or pulse dialling /
private branch exchange
In function 15 you can select either tone and pulse dialling and
then if there is a connection to a private branch exchange.
Your phone can dial in two different ways. Older telephone systems
usually work with pulse dialling whilst modern, digital systems use
tone dialling, which is faster. You can change the dialling mode of your
fax machine. If you do not know which method your line uses, contact
your telephone company.
It is necessary to send tone dial signals to make use of certain services. If
your telephone system works on pulse dialling, you can still send tone
signals by pressing * or #. All numbers are then transmitted
in the tone dialling method. As soon as you replace the handset
on the fax machine, your fax machine will switch back to pulse
dialling.
! If you cannot establish the desired telephone or fax
connection to the called party, select a different
dialling mode.
1
Select function 15 by pressing FUNCTION and then entering
the digits 15. Press OK.
2 Choose pulse or tone dialling by pressing </>. Press OK.
DIAL MODE: PULSE
DIAL MODE: TONE
3 Press </> in order to switch to operation on a PABX extension.
Press OK.
PABX: NO
PABX: yes
4
Now enter the key that has to be pressed to obtain an outside line
(outside line access code). This is either R or a number key. Press
OK.
5
Press OK. Your machine will then check that the outside line can
be obtained.
6 ... if the check is successful, briefly appears:
CHECK OK
7
... if the check is unsuccessful, briefly appears:
CHECK NOT OK
8
You will be asked to repeat the entry. Change either the dial mode
or check the key for obtaining an outside line. However, if you have
chosen the correct dial mode as well as the correct key and on the
display still appears the message
CHECK NOT OK
delete the key for obtaining the outside line by pressing <.
In case your PABX requires R to obtain an outside line but it is
still not possible to get through to the line, your system might not
be according to the regulations. Therefore some technical settings
have to be changed on your fax machine. Please refer to
your “Fax Call Centre”.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips Magic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips Magic in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips Magic

Philips Magic User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info