521767
17
Zoom out
Zoom in
Previous page
1/44
Next page
17
User Manual
Fax switch
The built-in fax switch enables you to phone and fax
from the same telephone connection and use addition-
al devices. The fax switch separates fax and voice mes-
sages. For example, it can receive fax messages silently,
i. e. without ringing to avoid causing a disturbance.
The operating modes S and M for day and night op-
eration each allow you to decide on different modes
during the day and at night; how often the machine
should ring prior to receipt of faxes or before the an-
swering machine is turned on.
You may change-over the operating mode between S
and M of your fax machine automatically using the
timer function U.
Timer U
The built-in timer U distinguishes between day S
and night M. With the default values the fax machine
will ring during the day when it receives fax calls and
telephone calls. At night (10:00 p.m. to 6:00 a.m.), faxes
will be received without ringing and telephone calls will
be announced with a quieter ring.
If the U symbol is displayed the timer is activated. To
switch the timer on or off hold down the U button
for two seconds.
You can change the times when the fax machine should
switch between day S and night M:
1 Select function 33 by pressing MENU, 33 and
OK.
2 Enter the time at which you want your fax machine
to switch automatically to S (e.g. 08 00 for
8:00 a.m.) and confirm with OK.
3 Enter the time at which you want your fax machine
to switch automatically to M (e.g. 23 30 for
11:30 p.m.) and confirm with OK.
Set SM mode
with built-in answering machine
Display Possible settings
tAM rings: 0, 1, 2, 3, 4, 5, 6, 7, 5/2
fax rings: 0, 1, 2, 3, 4, 5,
Manual reception
Ringer vol.: low, med, high
listen in: on, off
1 Select function 31 (day) by pressing MENU, 31
and OK.
2 Select number of rings with u before your an-
swering device will be activated. TAM RINGS: 5/2
3 Confirm with OK.
4 Enter the number of rings after which the fax
machine goes online and separates faxes from tel-
ephone calls. If the call is a fax call the fax machine
switches to reception. Telephone calls will continue
to ring. FAX RINGS: 5
5 Confirm with OK.
6 Using u, determine the ringer vol-
ume when receiving a call. Confirm with
OK. RINGER VOL.: HIGH
7 Select with u if the caller should be heard while
leaving a message.
listen in: on, off
8 Confirm with OK.
9 To activate mode M select MENU 32 (Night)
OK and repeat steps 2 to 8.
without built-in answering machine
Display Possible settings
total rings: 0, 1, 2, 3, 4, 5, 6, 7
fax rings: 0, 1, 2, 3, 4, 5,
manual reception
Ringer vol.: low, med, high
1 Select function 31 (Day) by pressing MENU and
numbers 31. Confirm with OK.
2 Use u to set the number of rings after which
fax reception is activated if the handset is not lift-
ed. TOTAL RINGS: 5
3 Confirm your entry with OK.
4 Now enter the number of ringing signals after which
the fax switch should accept the call and separate
faxes from voice messages. If the call is a fax call
the fax machine switches to reception. Telephone
calls will continue to ring. FAX RINGS: 5
5 Confirm your entry with OK.
6 Using u determine the ringer volume when re-
ceiving a call. RINGER VOL.: HIGH
7 Confirm with OK. To activate mode M select MENU,
32 (Night) and OK. Repeat steps 2 to 6.
If you cannot receive any faxes, you may have set
both ringing signal numbers too high (see points 2
and 4). Set both ringing signal numbers to values
lower than five.
Other telephones will ring for as long as the setting
under fax rings.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips Magic 3-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips Magic 3-2 in the language / languages: English as an attachment in your email.

The manual is 8,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips Magic 3-2

Philips Magic 3-2 User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info