521763

Philips Magic 2 Manual

29
Zoom out
Zoom in
Previous page
1/40
Next page
29
Der Anrufbeantworter
9 Answering machine
(only with built-in answering machine)
Your fax machine is equipped with a digital telephone answering
machine. All recorded messages are stored in a solid-state
electronic memory which has a recording capacity of up to 30
minutes. There is neither a magnetic tape nor a cassette.
Your answering machine is factory-programmed with a
recorded outgoing message. If you want to record your
own outgoing message, proceed as described under
“Recording a message”. Write down your messages before
you record them.
Make sure that your fax machine stands on a hard, flat
surface, because otherwise the microphone may be
covered.
Switching on and off
Activate or deactivate your fax machine with ON/OFF. Activate mode
is indicated with the symbol b on the display.
Recording a message
1 Hold down RECORD for two seconds. Press RECORD
again, until you hear a confirmation tone. Lift the handset
and start to record your message.
2 A black bar indicates you how much memory is available for
the outgoing message (max. 20 seconds).
3 Stop recording by pressing RECORD or STOP.
4 The new answering message is automatically replayed. By
pressing </> you can change the volume of the message.
5 To hear the message again, press RECORD for a while (two
seconds) and then PLAY.
Duration of recording
1 Select MENU 51 and press OK.
2 Press </> to choose between 30, 60, 120 seconds or the
AUTO mode (unlimited recording time). Please note that
AUTO mode is not available in all countries.
3 Confirm with OK.
Listening to messages
1 If PLAY flashes, messages have been recorded for you. Press PLAY
to listen to the first message. The date and time the message was
received will be shown on the display.
2 The next message will be replayed if you press PLAY while
listening to any message. (If you want to switch to the first
message, while listening to the other messages, press 1.
3 After listening to your messages PLAY will stay on until all
messages have been erased.
Play back volume
1 Press </> while playing back messages. The current volume
setting will be displayed.
2 Press </> to obtain the desired volume.
Deleting messages
Single messages
1 If you want to delete the message which is currently being played,
press CLEAR.
2 You will be asked on the display if you really want to delete this
message. Press CLEAR again.
All messages
1 Press CLEAR after having listened to all messages.
2 If you actually want to delete all messages, press CLEAR again. To
interrupt the deleting process press STOP.
Forwarding messages
Your fax machine can automatically forward all incoming messages to
another telephone number. Enter the telephone number to which you
wish recorded calls to be forwarded. You can select the number of mes-
sages to be forwarded each time. Your fax machine will wait until the
selected number of messages has been received and then calls the desired
number automatically. A text announcing the call forwarding is transmit-
ted when the connection is made. Then the party to which the calls are
being forwarded needs to enter the access code (see function 52). If
the correct access code is not entered within 40 seconds, your fax ma-
chine will disconnect the call.
1 In case your answering device is deactivated turn it on with
ON/OFF. The symbol b appears on the display.
2 Select MENU 55 and press OK.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips Magic 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips Magic 2 in the language / languages: English as an attachment in your email.

The manual is 3,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips Magic 2

Philips Magic 2 User Manual - German - 44 pages

Philips Magic 2 User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info