663513
20
Zoom out
Zoom in
Previous page
1/31
Next page
18
English
Sound Control
IMPORTANT!
For proper surround sound, make sure you have
followed the Connections and Preparations
procedures fully.
The centre and surround speakers only operate
when the system is set to surround sound mode
and the source material being played is recorded
or broadcast in Dolby Digital, DTS or Dolby
surround sound.
Stereo broadcasts or recordings will produce
some surround channel effects when played in a
surround mode. However, mono (single channel
sound) sources will not produce any sound from the
surround speakers.
Selecting the surround sound mode
Press SURROUND repeatedly to select : Multi-channel,
3D Sound or stereo mode.
The availability of the various surround sound modes
depend on the number of speakers used and the sound
available on the disc. The available output modes are shown
below.
When playing an SACD, press SURROUND to select:
SACD multi channel or SACD stereo.
Multichannel
Dolby Digital
Dolby Digital (also known as Dolby 5.1) and MPEG Multichannel deliver a
realistic and dynamic sound similar to theatre and cinema. It requires
connection of all five speakers (front left/right, centre, surround left/right)
and subwoofer for correct Dolby Digital sound reproduction. Each channel
plays its own unique role in providing the right sound. Front left, centre
and right join two surround speakers to reproduce high, mid and bass
frequencies in five full-range channels of surround. Bass rumble, explosions
and low frequency effects you feel are delivered through the subwoofer. A
large number of DVD discs have been recorded in Dolby Digital.
DTS Surround
DTS Surround is a cinema surround sound format that offers superior
digital audio performance. DTS offers more clarity and definition especially
for higher tones. The better sound quality is a result of the limited sound
compression (3:1 instead of 11:1 for Dolby Digital) and the 20-bit
resolution.
Dolby Surround
The Dolby Surround system is a specially encoded two-channel analogue
format that will produce sound through four speaker channels (front left,
centre, front right, mono surround) when a Dolby Pro Logic Decoder is
used. It is also compatible with stereo systems but the user will only have
two-channel (front left & right) sound.
Matrix
A new surround playback system that delivers five-channel surround
sound (front left/right, centre, surround left/right and subwoofer).
3D Sound
A new surround playback system that delivers surround sound from only
the two front speakers and a subwoofer.
Stereo
All sound is reproduced and played through the front left and right
speakers. This enables standard stereo reproduction.
Selecting the digital sound effect
The digital sound effects allow you to select from various
pre-set modes that control the frequency bands of sound
to optimise certain musical styles. It greatly enhances the
excitement and enjoyment of your favourite music.
Press SOUND repeatedly to select the available sound
effect.
When playing a DVD/VCD, select :
CONCERT, DRAMA, ACTION or SCI-FI
When playing a CD/MP3-CD/SACD or in
Tuner or Aux mode, select :
CLASSIC, JAZZ, ROCK or DIGITAL
Selecting the clear voice effect
The clear voice sound feature enhances the centre and
surround sound speakers.
Press VOICE on the remote control to switch on or off
the clear voice effect.
Volume control
Adjust VOLUME button (or press VOL +/-) to
increase or decrease the volume level.
For Philips TVs only
Press TV VOL +/- on the remote control to adjust the
TV’s volume level.
To listen through the headphones
Connect the headphones plug to the n socket at the
front of the system.
The speakers will be muted.
To switch off the volume temporarily
Press MUTE.
Playback will continue without sound and "MUTE" is
displayed.
To restore the volume, press MUTE again.
Dimming the display screen
Press DIM repeatedly to select different levels of
brightness for the display screen.
Basic Functions
BASIC FUNCTIONS
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips LX8000SA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips LX8000SA in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips LX8000SA

Philips LX8000SA User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info