44377

Philips Laserfax 825 Manual

40
Zoom out
Zoom in
Previous page
1/48
Next page
40 Chapter Appendix
work from a private branch exchange, one
must dial a number or press a key before
the actual telephone number; in most
cases this is zero (see Outside Line Access
Code).
Pulse Dialling: see Tone Dialling
Resolution: Number of dots per inch (dpi).
For sending and receiving faxes, the reso-
lution options available are Normal, Fine,
SFine and Photo. For copying, the avail-
able resolutions are Fast, Quality and Pho-
to.  e higher the resolution, the longer it
takes to complete the transmission.
Scanning: e reading of a document into
the fax memory or into the computer in
order to send it, copy it or edit it.
Sender Identification: e telephone
number and name of the sender as well
as the date and time of the fax transmis-
sion appear in the upper margin of each
received fax.
Serial Connection: see Additional De-
vices
Soft Modem: e machine does not con-
tain a fi xed, built-in modem. A program
executes the modem function on demand
and accesses the machine memory (RAM).
e features and functions of the soft mo-
dem can be modifi ed by altering the soft-
ware (see Hard Modem, see Modem).
Stand-alone: Single work station that is
not connected to other workstations over
a network.
Sub-address: see Fax Polling
Time Stamp (Laserfax 855): e exact
date and time of receipt appear in the page
header of each received fax. A memory
buff er guarantees that exact data are issued
even after a power loss. In this way, you
can verify exactly when a fax has reached
you.
Tone Dialling (also Dual Tone Multi-
Frequency):
In many countries, tone
dialling has replaced pulse dialling, in
which each number was sent as a cor-
responding number of pulses. With tone
dialling, a specifi c tone is assigned to each
key (referred to as DTMF tones).
Toner Level Memory: Update the toner
level memory of your fax machine with
the Plug’n’Print card that is included
with each new toner cartridge. Your fax
machine registers the extent of toner used
for every print-out and calculates the toner
level of the toner cartridge on that basis.
e indicated toner level is only meaning-
ful if you update each new toner cartridge
with the Plug’n’Print card that is provided
with the cartridge.
Transfer Speed: CCITT/ITU has pub-
lished international standards for the
transmission of data over telephone lines.
All short names begin with V, so these are
also referred to as V standards.  e most
important transmission speeds for fax
transmissions are:
V.17 – 7,200 to 14,400 bps
V.21 – maximum 300 bps
V.22 – maximum 1,200 bps
V.22 bis – maximum 2,400 bps
V.27 ter – maximum 4,800 bps
V.29 – maximum 9,600 bps
V.32 bis – maximum 14,400 bps
V.34 – maximum 33,600 bps
Warm-Up Phase: Normally, the machine
is in the energy saving mode (see Energy
Saving Mode). In the warm-up phase, the
fax machine heats up the printing unit un-
til it has reached the necessary operating
temperature, after which the copy or fax
can be printed out.
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips Laserfax 825 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips Laserfax 825 in the language / languages: English as an attachment in your email.

The manual is 6,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips Laserfax 825

Philips Laserfax 825 User Manual - German - 48 pages

Philips Laserfax 825 User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info