53702
36
Zoom out
Zoom in
Previous page
1/44
Next page
36
Error
NO CONNECTION
When you receive a phone call, after
the first ring your correspondent
does not hear the usual ringback
tone.
Your fax machine rings once, then
there is a moment of silence and
another ring signal after that.
You do not hear the dial tone when
using your cordless telephone.
You cannot transfer calls from the
additional phone to the fax machine.
Your external answering machine
records fax signals but your fax
machine does not receive these fax
messages.
Copy is blank.
On lifting the handset you hear a
tone or silence.
Possible cause
You no longer have a valid Internet
connection, but the device still
attempts to transmit international faxes
via the Internet.
Your correspondent is being informed
that the fax machine has taken the call
already and that he has to pay charges.
Your machine checks whether it is a
phone or a fax correspondence.
This process is perfectly normal!
The connection of your cordless phone
might be incorrect.
Your auxiliary devices are not set to
tone dialling.
You have not connected your external
answering machine correctly.
Document loaded the wrong way up.
Printer or scanner faulty.
The caller is trying to send a fax.
Remedy
Switch the automatic fax despatch
via the Internet off, using function
29.
In function 31 or 32 you can put
the tollfree rings to a higher level
under
FAX RINGS:
(see chapter
Fax switch / Setting the operating
mode).
You have just noticed how the
automatic fax-switch operates. After
the first ring signal the fax machine
takes over the call. When the fax
machine has recognised that the
incoming call is a telephone
correspondence, the fax machine
will continue to ring.
The connection of your cordless
phone might be incorrect. Check
whether the cordless phone was
installed correctly (see chapter
Installation / Connecting addi-
tional devices).
For further information as to how
you change your device to tone
dialling see the instructions of your
additional telephones. Otherwise
you have not configured your
external phones to be in serial with
your fax unit (see chapter Installa-
tion / Connecting additional
devices)
Connect your answering machine
as described in the chapter Installa-
tion / Connecting additional
devices.
Load the document with the
printed side up.
Service.
On the fax machine: press START.
On the additional phone: press *
and 5. Then replace the handset.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips ipf176 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips ipf176 in the language / languages: English as an attachment in your email.

The manual is 11,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info