53702

Philips ipf176 Manual

35
Zoom out
Zoom in
Previous page
1/44
Next page
!#
Störungen
Error
The scanned copy is printed out
with white or black stripes.
The copy of the scanned document
is mirror-inverted.
TRANSM. ERROR
Error report
NO CONNECTION
or
REDIAL FAILED
NO LOOP CURRENT
When you lift the receiver of your
fax machine you do not hear the dial
tone. The display shows
NO DIALTONE
busy
or
fax transmissions are constantly
interrupted.
You cannot receive any faxes.
You cannot phone or send faxes.
Possible cause
The scanner was not placed correctly
on the document.
The scanner was moved in the wrong
direction.
The telephone connection is of poor
quality.
The recipient has a paper jam or has
run out of paper.
Your fax partner’s line is busy, does
not answer or a different device like
an answering device answers.
Improper installation or plug-in of
fax machine.
You are connected to a PABX system.
You have connected your telephone
cable to the socket identified with
EXT. TEL.
Your fax correspondent has a fax
machine that cannot receive the usual
standard identifying signals.
You have set the number of rings too
high for the answering machine or
the total number of ringing signals for
a device without answering machine.
You are operating your fax machine
on a private branch exchange and
have not set it accordingly.
Remedy
Press the scanner firmly against the
document or put the document on a
flat surface.
Move the scanner in the direction
marked with an arrow across the
document (symbol on the right side
of the scanner).
Try again or send the fax at reduced
speed (function 21).
Call your fax partner or try to
transmit at a later stage.
Try later or draw your fax partner’s
attention to a possible installation
fault.
Check the installation of your fax
machine.
Check the settings in function 15.
Connect your telephone cable to the
socket on the bottom of your fax
machine identified with LINE.
Try to send the fax manually: press
DIAL/z and dial the fax number.
You will hear the call being estab-
lished. If the recipient is using an
automatic answering device, wait
until you hear a tone after the pre-
recorded message. Press START.
Set the number of ringing signals for
the answering machine or the total
number of ringing signals with
function 31 or 32 to lower than five.
In function 15, select
PABX: yes
.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips ipf176 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips ipf176 in the language / languages: English as an attachment in your email.

The manual is 11,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info