53704

Philips ipf146 Manual

26
Zoom out
Zoom in
Previous page
1/44
Next page
26
4 Press the scanner slightly against the document. Slowly
move the scanner over the document from top to bottom.
The available memory capacity will be indicated on the
display during copy procedure. The correct copy speed will
be indicated by short confirmation tones. If they appear too
fast, you will hear a warning signal indicating that the
scanning process of the document was not successful. Start
the copying again as described in 3 and 4.
5 After the scanning process is completed the document will
be printed if you press START or automatically after
approximately four seconds. Documents larger than A4 will
be split up into more than one page automatically. During
the printing process printed information will be simultane-
ously erased from the memory. Press STOP or CLEAR to
terminate printout. The scanned document will be erased
from the memory.
6 Place the scanning device face front into the fax machine
after use. Press both sides of the scanner down until you hear
a definite click.
In case the scanner was not put in correctly the indicator
lamp v flashes and on the display appears
CHECK SCANNER
Scanning into the PC
1 Place the document in the document feed.
2 There are two ways you can call up the scan function:
a Click on the LinkFax-Pro symbol on the right lower edge
of your screen. Select in the menu the command “scan”.
b Open the graphics program into which you wish to scan.
Select as source the Linkfax-Pro-Scanner driver.
3 The Linkfax-Pro-Scan window will open.
4 You can create a preview by using “page view”. On this
preview, a section of the document can be selected which is
to be scanned. With preview, you can also try out the effects
of various adjustments (e.g. filter, etc.).
5 Select the desired scan settings.
6 If the document consists of several pages, click on “auto-
matic document feed”.
7 Press the “Scan” command.
8 Once the scanning procedure is completed, the image of the
document can be stored.
If you click on the “Help” command, on-line help will
open.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips ipf146 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips ipf146 in the language / languages: English as an attachment in your email.

The manual is 11,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info