53704

Philips ipf146 Manual

19
Zoom out
Zoom in
Previous page
1/44
Next page
19
Die Faxweiche
To be able to use this function you must set your additional or
cordless telephone to tone dialling. If your telephone service is
not compatible with this dialling method and requires pulse di-
alling, you must temporarily set your additional device to trans-
mit tone dial signals. Please refer to the operating instructions of
your additional device to find out how to make this temporary
adjustment.
! Only change the specified EASYLINK codes if
absolutely necessary!
If you need to change the pre-set codes, select MENU 34 and
press OK. Enter a two digit code. The first digit should be the
sign * or #. Confirm with OK. Execute this procedure for
each of the three codes.
Please note that the three EASYLINK codes must be
different. Otherwise on the display appears:
CODE NOT OK
External answering
machine
Connect the answering machine as described in chapter Installa-
tion / Connecting additional devices.
To provide for the optimum performance of an external answer-
ing machine, set this device to ring once or twice. To avoid the
automatic acceptance of calls by the fax-switch, you must set
FAX RINGS:
and
TOTAL RINGS:
to a value at least two
ringing signals higher than the setting of the external answering
machine.
If you switch off the external answering machine, calls are ac-
cepted by the fax-switch (see sub-heading Setting the operating
mode SM /without built-in answering machine)
Setting example:
ANSWERING MACHINE RINGS 2
TOTAL RINGS:
4
FAX RINGS:
4
Tips:
1 The answering message of your answering machine should
be shorter than 10 seconds.
2 Please avoid music in your outgoing message.
3 If your fax machine is unable to recognise older fax machine
models, which do not transmit those signals that are
commonly used in today's technology, you should advise
your callers in your answering message to press * and 5
followed by START to commence the fax reception.
4 If the automatic fax reception is impossible, press START to
manually begin receiving the fax.
5 If your answering machine provides an “economy function”
(e.g. a function which changes the number of ringing signals
as soon as a message was recorded), you should preferably
switch this function off.
6 It is possible that the answering machine not only counts
the messages received, but also the number of fax calls.
7 Please ensure that the code for starting the fax reception
from other telephones (factory setting * and 5) is not the
same as for remote access to recorded messages. Where
necessary the code for function 34 may be changed (see sub-
heading EASYLINK).
8 If your answering machine accepts the call but your fax
machine does not stop ringing, try and install your answer-
ing machine by serial connection, for example by connect-
ing it to the same telephone socket or to the EXT.TEL.
socket of your fax machine (see chapter Installation /
Connection of additional devices).
9 If your answering machine cannot accept calls, your fax
machine will automatically start to receive faxes after the no.
of ringing signals set in has been received.
10
If your external answering machine records fax signals, but
your fax machine cannot receive any faxes, check the
connection of your external answering machine. Connect
the external answering machine to the same telephone
socket or to the EXT.TEL. socket of your fax machine (see
chapter Installation / Connection of additional devices).
TOTAL RINGS:
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips ipf146 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips ipf146 in the language / languages: English as an attachment in your email.

The manual is 11,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info