6
7
8
9
Placing the bowl (B) (fig. 2)
- Put the bowl on the food processor as
shown (1)
- Turn the handle in the direction of the
arrow until the bowl cannot be moved any
further and you hear a ‘click’ (2).
Placing the lid (C)
- Put the lid on the bowl as shown in fig. 3.
- Turn the lid with some force in the direction
of the arrow until the lid will not move any
further and you hear a ‘click’ (fig. 4-5).
- Make sure that the mark on the lid and the
arrow on the bowl are directly opposite
each other. The projection of the lid will
now cover the opening in the handle of the
bowl (fig. 6).
Chute (L) and pusher (M)
• The chute can be used to add liquid and
solid ingredients (fig. 7).
• Use the pusher to push ingredients through
the chute (fig. 8).
• You can also use the pusher to close the
chute while the appliance is running to
prevent dust or drops of liquid from
escaping through the chute (fig. 9).
Built-in safety lock (F)
The motor unit as well as the lid (C) have
been provided with marks. The appliance will
only function if the arrow on the motor unit is
placed directly opposite the mark on the lid. In
this position, the projection (E) of the lid will
cover the opening in the handle of the bowl.
How to use the appliance
Note: The appliance will only function if
• The screw cap (P) or the blender (Q-U)
have been properly mounted onto the
motor unit (A) and
• The bowl (B) and the lid (C) have been
placed on the motor unit in accordance
with the instructions in this booklet.
• If both the blender and the bowl have been
mounted correctly onto the motor unit, only
the blender will function.
Set the speed control (N) to the position
indicated in the table on pages 8-10 and
switch the appliance on. When you have
doubts about the right speed, always select
the highest speed (setting 2).
5
