424004

Philips hfc 171 Manual

37
Zoom out
Zoom in
Previous page
1/52
Next page
– 35 –
THE ANSWERING
DEVICE
Remote access
You can control your answering device from a remote telephone. The remote phone must be switched to tone dialling or
you must use a tone dialling box. Please consult your dealer in this case.
Preparing your fax machine for remote access
Before you can use the remote control or remote access facilities you have to enter an access code.
This code will also serve as the access code for function 55 Forwarding.
1
4
7
2
5
8
0
3
6
9
#
∗
OK
FUNCTION
Select function 52.
52 ACCESS CODE
OK
FUNCTION
Press the OK key. You will be asked to enter your code. If you do not
want to enter a code press STOP.
code: 0000
1
4
7
2
5
8
0
3
6
9
#
∗
Enter the four-digit code.
code: 4321
OK
FUNCTION
Press the OK key. The code is now stored.
15-MAY-99 12:30
Remote access of the answering device
You may wish to play back messages when you are away from home.
Call your fax machine and wait until you hear the outgoing message.
Enter your four-digit access code. The outgoing message is interrupted. If the outgoing message does not stop playing
after you have pressed the first key of the code, press the first key again. Enter the rest of the code only after the outgoing
message has stopped playing. You will hear a brief confirmation tone after every digit.
When you enter the remote access using a mobile phone or from abroad, you must wait at least 1 second between each
digit of the code.
When you have entered the fourth digit, you will either hear one confirmation tone which means that the code is accepted
or four short whistle tones which indicate that one or more of the four digits was wrong.
You have three attempts at entering the right code number, after which you will be disconnected.
Once you have entered all four digits correctly you will be able to listen to all new messages. If no new messages have
been recorded you must wait for a second confirmation tone before entering further commands.
You can now enter more commands or you can replace the receiver to end remote access.
Below you will find a table showing all functions which can be carried out remotely.
Make a note of your access code by incorporating it in a longer number, for example, so that it cannot be recognised by
other people.
If you wish to change your access code, repeat the above procedure and enter a new code.
To switch the remote access function off again, enter 0000 as four-digit code.
Ensure that the access code (function 52) is not the same as the VIP code (function 53) for your answering device. If you
try to enter the same code, the message CODE NOT OK appears on the display. You must then select another code.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hfc 171 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hfc 171 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips hfc 171

Philips hfc 171 User Manual - German - 50 pages

Philips hfc 171 User Manual - Dutch - 52 pages

Philips hfc 171 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info