424004
36
Zoom out
Zoom in
Previous page
1/52
Next page
– 34 –
* If a forwarding message has already been recorded:
OK
FUNCTION
Press the OK key.
REC. MESSAGE:YES
OK
FUNCTION
Select with the CURSOR RIGHT or CURSOR LEFT key. If you wish
to record a new forwarding message, select YES. If you want to use
the existing message, select NO. Press the OK key to confirm. Then
proceed as described above.
REC. MESSAGE: NO
Recording a telephone conversation
You can record a telephone conversation with your fax machine.
RECORD
Press the RECORD key during the telephone conversation (please
note that you cannot record the conversation while operating hands-
free). The display will show:
ßßßßßßßßßß
STOP
Replace the handset or press the STOP key to stop recording.
MESSAGES: 1
PLAY/PAUSE
The PLAY/PAUSE key flashes. Press the PLAY/PAUSE key to listen
to the recorded conversation. The conversation can be deleted like a
recorded message.
1 15/05 12:30
VIP code
(Ringing despite switched on answering device)
A caller can use a four-digit code to make the telephone ring after the answering device has taken the call. This enables a
person to whom you have given the code to reach you whilst all other calls are intercepted by the answering device. The
VIP code is advantageous if you have switched the answering mode to SILENT in function 32. Since the fax machine still
rings when using the VIP code you have the option of receiving important messages.
1
4
7
2
5
8
0
3
6
9
#
OK
FUNCTION
Select function 53.
53 vip code
OK
FUNCTION
Press the OK key. The display will show the last code you entered.
Your fax machine has been supplied with the code 9999 preset.
CODE: 9999
1
4
7
2
5
8
0
3
6
9
#
Enter a new code.
CODE: 1234
OK
FUNCTION
Press the OK key.
15-MAY-99 12:30
To record a telephone conversation all the free space of the memory is available for this function. Existing messages will
not be deleted. When the memory is full, a warning signal sounds and the CHECK DISPLAY lamp flashes.
The VIP code (function 53) must not be the same as the access code (function 52). If you attempt to enter the same code
the message CODE NOT OK will be displayed and you must select another code.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips hfc 171 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips hfc 171 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips hfc 171

Philips hfc 171 User Manual - German - 50 pages

Philips hfc 171 User Manual - Dutch - 52 pages

Philips hfc 171 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info