598019
80
Zoom out
Zoom in
Previous page
1/88
Next page
78
ENGLISH
Machine actions Causes Solutions
Co ee is not brewed, is brewed
slowly or only a few drops are
brewed (see note).
The co ee grind is too  ne. Change co ee blend or adjust grind-
ing as explained in the Adjusting the
Ceramic Co ee Grinder” chapter.
The circuit is not primed. Prime the circuit (see the "Using the
Machine for the First Time" chapter).
The brew group is dirty. Clean the brew group (see the "Weekly
Cleaning of the Brew Group" chapter).
The dispensing spout is dirty. Clean the dispensing spout and its
holes.
The machine circuit is clogged
by limescale.
Descale the machine.
Co ee leaks out of the dispens-
ing spout.
The dispensing spout is clogged. Clean the dispensing spout and its
holes.
No hot water is dispensed. The circuit is not primed. Prime the circuit (see the "Using the
Machine for the First Time" chapter).
The machine circuit is clogged by
limescale.
Descale the machine.
Frothed milk is too cold. The cups are cold. Preheat the cups with hot water.
The milk is not frothed or will
not come out.
The milk carafe is dirty or not
inserted correctly.
Clean the carafe and insert it correctly.
The carafe dispensing spout has not
been removed correctly.
Check that the milk dispensing spout
has been removed correctly.
The milk carafe is not fully
assembled.
Make sure that all components have
been correctly assembled.
The type of milk used is not suitable
for frothing.
Use the type of milk suggested in the
"Milk Carafe" chapter.
The descaling cycle cannot
be completed.
The water dispensed for the rinse
cycle is not enough.
Press the on/o button and follow
the instructions described in the
“Interruption of the Descaling Cycle
section.
Note:
* These problems can be considered normal if the co ee blend has been
changed or if the machine has just been installed. In this case wait until the
machine performs a self-adjusting operation as described in the "Saeco
Adapting System" chapter.
80


Need help? Post your question in this forum.

Forumrules
1

Forum

philips-hd8828

Reset search

  • The coffee machine does not function. It displays a red small little spanner with fault code 22. How do I fix this? Submitted on 17-12-2019 at 17:04

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips HD8828 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips HD8828 in the language / languages: English as an attachment in your email.

The manual is 5,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips HD8828

Philips HD8828 User Manual - German - 84 pages

Philips HD8828 User Manual - Dutch - 84 pages

Philips HD8828 User Manual - French - 88 pages

Philips HD8828 User Manual - Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info